Search results

Make sure u spray the filter with oil... and ALOT..... $2 cooking oil in a can does the trick.... dont bother spending $30+ on a can from the bike shop its a rort! Mods: Get a inner rotor kit and oil slinger.

Make sure u get some pics.... Vids would be even better :D

lol So what problems would ppl be getting if they didnt use "the right oil"... U could use olive oil and u probably wouldnt have any problems for ages! Just use whatever, seriously..... as long as its motorbike oil... mixing oil is a complete waste of time and effort.... they are just...

Had to remove the front suspension guards as they where rubbing on the tyres. Once my 14T drive sprocket arrives I think I might have to alter one of the chain guide bolts as I think it may rub when I adjust the chain.... These tyres seem pretty sticky. My finger nail digs into the tyre real...

lol will add pics to the minimotards pic thread in 10

2 things to try.... when they put them on in the shop they use a gel on the tyre.... try vasaline..... and also.... u may need to change ur tube.... dirt bike tyre tubes dont push the tyre to the outside.. u need a different tube.

I had to order some 120 in as it was a 3 week wait for the 110! Im getting them fitted as we speak... they might not even fit in my swing arm. I measured it up and i think they might rub on the chain guide and front suspension protectors.... doh.... Look for some cheap 120 pilot sports for...

I wonder if machining out the swing arm to 15mm will make it a little weak? Im sure your old man would know.... but yeah, worst case change it over and sell your current one on ebay for the same amount. No dramas. gl with the build mate

It would def happen if u only stuck it down the pipe.... it would blow out in 5 min!

Have u done this before? The reason I ask is because I have heard that steel wool burns up very quickly and before long your exhaust will have no packing at all :confused:

Instead of buying gaskets, goto autobahn and buy gasket paper and cut them out yourself... piece of piss and cheap as chips lol Just make sure you take your old gasket along so they can match up the thickness :)

Dude, that rear wheel has a 15mm axle and your nugget rear swing arm is only 12mm! Wont fit.... Your bike is so sweet, why didnt you sell your swing arm on ebay and get one from DHZ? Instead of modifying the frame and changing the geometry of the rear shock. You will regret it later...

After talking to a few tyres techs I have some info...... Advice given to me is as follows. This is for fitting to 12" 1.85 rims. Michelin pilot sport (powers arent made in 12") are the best option for racing as they are the softest compound tyre. Getting a 120 profile (tyre width) tyre is...

i know its a old post bit I just read it... its a great list. I just went upto the local shop re tyres. I have some prices for the Pilot sport SC.... 110/90x12 64P TL will cost $86 each..... 120/70x12 51P TL are the cheapest as they are the most widely used @ $75 each.... 130/70x12 56P TL...

upload the pics onto ImageShack® - Hosting and then put the uploaded file into "img" tags in ur post :)

Thats what I mean by fine line... bottoming out is fine (1 or two times) as long as its not freakin huge. Like digging the bash plate into the ground so hard u get stuck lol... Reaching the bottom smoothly is actually bottoming out, just not aggressive like. I know what I mean in my head :P

Second hand GENUINE peewee 50 FTW... 125cc chinese for the older one... 110 will be outgrown in about 2 wks (wanting more POWAH!!!!)

When u say snapped ur shock, what part actually snaps? The shaft on them looks pretty decent! From jumping I take it?

What parts on the xy-s mdl are you referring to? The frame is the only one. And considering a pitpro frame costs $100 your still infront even if it does break. I can only talk for the Lifan as that is what I have. Engine is same lifan, suspension is same USD front and gas rear (actually the...

Cheers man:)