Search results

Mostly long boring videos using go pro camera but its good to have memories not cut and chopped heavily Im also into scooters and motorized bikes, shooting so check out my channel for other videos http://www.youtube.com/watch?v=zbr4kNJHXnY Sikk 125cc pit bike - YouTube...

problem solved it was the pushrod length I notice I now have almost 1/4 inch of play before the brake lever activates the pushrod does make me have to really angle down the foot to slow down, but I did bend the brake lever when the lock ups first started to happen thinking my foot was...

After I detailed my bike I decided to give full effort into looking at the push rod adjustments I found I was able to screw it in about 1 inch more, or 15 turns I now see the brake lever hole, and the pushrod hole line up So before there must of still been pressure if after 15 turns up...

okay went on long rides today probably 3-1hr rides and 1/2 hr ride I would pull over every 10 min to feel brake rotor 1st 1hr ride I did not use rear brake. 2nd 1hr ride I had to because of all the down hills I think it was the end of the last 1 hr ride I could feel it not coasting well so I...

The rod length was my fault I was so concerned with the mounting bracket and black color and 2 piston I forgot to check the pushrod length in the pic So the one I got looks like you could take it out with those rusted nuts but the one on my bike has no nuts looks all one machined body/piece...

Here is what came in, I ordered black but look at the condition and finish plus I noticed the push rod is way to small, so I will try to either first get the correct one sent or refund I could always use the caliper and not anything else but who knows what will happen Im pretty pissed...

I found the adjuster nut on the brake lever rod So I tightened the rod about 4 turns this to me sucks up the lever, and when attached to the foot brake it then pulls it back down I guess then making you press a little more to activate the rear brake if im right then thats what I want to do...

Ive read some mention of adjusting the push rod on the brake lever does that just screw in and unscrew to change length?

yes at the time off roading no one had any tools so we had to wait to cool down, lesson learned until its fixed I did notice a few things today. If I take off the axle nut, the metal suspension housing expands maybe 1/4 inch. Sorry not an expert on all the names So that makes me think...

no I did not know you can adjust it at all and the other poster I dont think its bent I can spin the wheel and it look fine, its not bent enough to show any movement Sucks because even though I can get away crusising around the block here a few times once in a while it may not be enough to...

I ended up finding the entire rear brake setup minus the rotor from the pic the mounting bracket looks taller then mine, but the mounts for the caliper to go on look the same If the pic is even accurate who knows, says 125-150cc pit bikes im sure they are all the same So if thats true I can use...

I just got a used sikk pit bike, because the tranny was messed up I only rode a few times around the block. Put in new engine and again few times around the block. Went on a longer ride off road yesterday and when I was done noticed the rear wheel wouldnt spin. The rotor was super hot and...