Search results

I've been away from home so I haven't been able to work on it, planning on working on it when I'm back. Sent from my HTC One X using Tapatalk

It was closest to a chain noise, I opened the cover and the top of the cam chain is solid with no play at all and the bottom is loose, I suspect the chain has got caught in between the case and sprocket in the bottomend, it happen to me when splitting the engine, the chain slid down and got...

I put all the oil in a clear 1.5 ltr bottle, it filled up about half but i did lose about 50 mls on the ground, should i put some filter paper infront of the oil to see what is in the oil? i haven't found any filing in the the oil from watching it pour and looking at it in the bottle. I haven't...

the tip of the spark plug is still intact, hope i didn't damage the piston, its got less than 3 hours on it. It shifts through the gears fine so i think the bottom end is ok.

Hi guys, I was taking my x4r around for a spin in the backyard today and while in second gear with the clutch in at about half throttle it died and made some wierd noise, I kicked it over gently just to feel what was going on and it went down 3 times without compression at all but made some...

Snapped the shaft with vice grips while turning it and ended up drilling it out with a cobalt bit. Cleaned up as much of the bolt as I could and then got a thread tap and made some decent thread, i can't torque it up hard but I can get it snug, I put some medium strength threadlocker on there to...

Any ideas on how to take this out, I snapped a easy out in there trying to take it out, I've got it soaked in penetrating oil. Sent from my HTC One X using Tapatalk

And I was just about to make a transaction with him... Sent from my HTC One X using Tapatalk

ten.............................10

I wouldn't know if it was low compression as it's my first 2t, but the 155 has significantly more compression, it starts 1st kick if that's a good sign.

Picked up a 03 cr 125 with rec reg today :), i was wondering if you guys think i should freshen up the top end as i don't know how much hours it has done, also how can i lower it a bit without stuffing up the handling of the bike?

Another X4R! congrats on the bike :)

Thanks for the detailed response, there's no locking up or resistance whatsoever in the back wheel after opening up the bleeding nipple, this means that if i bleed the brakes everything should be normal right?

I've been having weird rear brake problems the past few weeks, two weeks ago the back brakes weren't working randomly and then the next day they were perfect, and now the back wheel is locking up while riding? i opened the bleeding nipple to let some air out but then my brother let air into the...

I did put the gear shifter up because of the mx boots so that must be the problem, do you know if the 6 plate clutch goes into the 5 plate 155z? DHZ told me it doesn't.

Just came back from the track, had a few problems. While riding my clutch gets hard to pull in and doesn't disengage the engine, after a few hard revs the clutch goes soft again. Also got also of false neutrals on the little jumps when i landed. I'm thinking new shift drum, gear box and clutch...

I got a exhaust leak where the muffler and pipe connect and out of 2 missing bolts in the muffler, will this effect performance in any way?

Been thinking of getting the taki hypercoil as well, do repco or supercheap stock the NGK iridium's?

I just connected the lead straight to the coil without using that connector boot with 2 ends, does it make a difference?