Search results

Order a #15 and #20 jets to play with. Im running a #20 in my lifan with the same carb. As for bogging down check your crank case breather hose. Mine split and was causing similar problems.

Thanks for the input it was a #20 as I found out on the final try of cleaning and reasswmbling the carb (it did the trick and unclogged the needle!) However I think I found the culprit of its problems; a split hose that I have no idea of its function.

My current set of wheels. An '89 VN Commodore. Only just got my p plates so she'll do.

So the Atomiks giving me the ****s. I put in a #25 pilot jet in the carb and its been leaking straight out the overflow since. Ive been through and cleaned the lot replaced the gasket and all. So whats a good new carb you guys would recommend for a lifan 125cc?

Gday mate. Most of these chinese pit bikes take similar axles. Just measure your axle diameter and track down an ebay special. You might need to source or get some axle spacers made up to center your wheel.

Pop the clutch and lean back. If I can get a 280kg 650cc to do it just give it a go. Also check your sprocket teeth count. The blokes on this forum will have many answers for you

Don't worry I plan on upgrading to those exact bars and replacing the kicker soon. Honestly I'm just having too much fun bashing it at the moment.

So I bought the Nitrous 125cc of Ebay around March for a grand sum of $580 including postage with the expectations of its a chinese bike I'll probably have it thrashed and broken within a few months. It was my first pit bike and first time I'd really ridden an offroad bike. Honestly these last...

Long story short I scored the bike for free and the reason it was free its literally a decent roller with a motor held together by roughly 15 bolts. So I'll take anything you have. I'm looking for a set of CR250-500 front end set up as well for a disc brake front end.

I'm enjoying my Atomik 125. I'm only a lil dude so works fine for me power wise.

Kiddos birthday went great with the exception of a worn exhaust gasket (fixed with cardboard gasket) and now his forks have worn so badly that theyve bent his brake disc. So once again anyone know where I can find some 1" x 500mm forks? I cannot find any in Australia.

Well kiddo gets his bike in roughly 4-5 hours. Lil Blue is finally dressed up. I had to swap rear wheels as I must've slashed the new tube putting it on some how. Brakes are tightened up and new training wheels are on. Honestly I think I may replace the shock as the one on it has seized but I'll...

So small update. I fabbed up some number plate and fender brackets and re-shoed it with wider tyres. Ill update new pics next week when the plastics go on and kiddo gets his present. In other news the Atomik copped its first beating today when I was pulling wheelies. I hit it too hard on the...

Thanks for all the tips mate. Im sure when my eldest blows his up after his birthday next week ill be referring back to this haha.

PLASTIC BODY PARTS : Pocket Bike Parts, Pocket Bike Parts. These guys have been pretty good to me.

Most of these minis 43 to 49cc generally take the same parts. Just google 49cc chinese parts and do some measuring of what you need to repair/replace.

After tinkering with the fitties for a bit I dragged the PY out for another look at the carb. Still overflowing fuel but oh well. I adjusted the idle speed and presto clicked into gear and went for a lap around the yard. A quick guess on the over revving was the idle speed was set way too...

So training wheels are on the plastic'd bike and looking good in red powder, new blue plastics have arrived as well as new wider tires for the other. Also contacted Jianshe and soon I'll have a new throttle assembly and carb. The spring in the throttle return is just too worn. Also contemplating...

I scored an Atomik Nitrous off ebay for under $600 delivered. Havent rode it for more than an hour though but so far so good

The mailman brought me some gifts. New blue plastics for the naked as well as a new carb and handlebars. The naked (soon to be lil blue) runs but needs a new exhaust gasket. New training wheels are going on the red one today then I'll blat around on the nitrous to run it in a little more. My...