Search results

Mini Dirt Bikes & Pit Bikes Forum

Help Support Mini Dirt Bikes & Pit Bikes Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
  1. A

    bike troubles

    hey racer182.I actually got the fuel tap bit confused.Up is generally on and down is reserve.If you look closely there is a diagram on the tap and one has a line through the bottom of the bowl to indicate reserve. Ok if there is fuel in the bottom bit that is the bowl,not the overflow.That has...
  2. A

    bike troubles

    Up is generally reserve and down is generally on.You can run it in reserve it will still work fine.If the bike wants to partially fire it sounds like the air/fuel mixture is too rich and maybe your float is partially stuck or you have crystallised fuel on the needle making it seep.Most places...
  3. A

    **need Help**.. No Brakes

    On the bottom of the master cylinder there is a locknut and the end which attaches to the pedal is adjustable.Make it as LONG as you can then bleed the system.Allow the brake to be partially engaged.As the pads bed in it will gain freeplay.I have to set them all up like that.The pads will wear...
  4. A

    wat oil?

    In 4 plate clutch packs (i.e. Lifan/Ducar) alot of people find clutches slip with synthetic oil and glaze the clutch fibre plates.In 5 plate clutch packs( i.e. Jailing) you can get away with synthetic oil.I never use synthetic in chinese motors coz at the end of the day all you ever do is pull...
  5. A

    Exhaust/Muffler?

    Staintune are now making a CRF50 exhaust which should fit and it will be awesome quality.Not too sure on how much engine performance will be gained without having to rejet carby.May find out some more about it im interested in getting one.
  6. A

    Parts??

    What brand of engine do you have? If its a Lifan or Jailing engine go to DHZ they will be able to fix you up no worries. DHZ Motor Sports
  7. A

    Chain tight then loose tight then loose - pitpro125

    Also check the rear wheel bearings to make sure that they are pressed into the hub fully.We find that alot of 12mm axles do this and the cheaper of the 15mm hubs also like to spit the bearings out of the hub.Make sure that the are both in fully.Good luck
  8. A

    Fast Ace forks

    The Fastace forks are so worth ever dollar you pay for them.The AS-03 is not fully adjustable where the AS-02 is.You can buy a pump for the Fastace forks and it will pump up to around 300psi.Aparently fastace are going to make a slightly longer set of front forks longer than the standard 640mm...
Back
Top