no spark

i have replaced all my wiring including the cdi coil kill switch and spark plug even the stator but I still have no spark

Hi I need some help here. So be my hero and help me:cheeky-smiley-005: I can start of with: Bike; Ten7 midsize (2012 or 2013) Engien; Lifan 140cc Problem, Im trying to change my 140cc lifan to a 150cc lifan. I can't get any spark in my 150cc. :action-smiley-003: If i move the...

Hi guys, So I recently picked up 2 new pit bikes, one being an automatic electric start SSR 125. The previous owner said that the bike had been sitting for months before I got it so I did all the regular maintenance like cleaning the carb, changing the gas and oil, and putting in a new spark...

I know it's been covered b4 but i have no idea what i'm supposed to be doing when it comes to multimeters :( Hopeing someone can help. I have so far elimiated the following Brand new plug Swap 3 different plug leads and heads Changed out the coil to the old standard one Unplugged and...

Hey guys, So my chain flew off on my lifan 125 and snapped the pulse sensor off. So I bought a new stator plate. It seemed to be exactly the same except the sensor was a tiny bit closer to the flywheel and I had to grind about half a mil off the 'nib' of flywheel so it wouldn't hit when it...

Do they use irk, ork, or a regular stator? I ask this because I was on pitbikeclub's website and I asked this question. They said that I can put a 155cc stator on 125cc engine to give my bike better throttle response.

Can you replace a stock bike with a new stator and because of that new stator it has better throttle response/acceleration? Like are there "performance" stators and flywheels? and I dont mean and ORK or IRK.

Hi guys New to the forum, have a problem with my genuine thumpstar engine, i recently replaced the stock magneto with one of those performance magnetos off ebay, but i cannot for the life of me get spark. ive replaced the coil, spark plug, and try every possible combination of wiring here...

Bought an aftermarket stator/flywheel and all on eBay (link below). Swapped it into my lifan 110cc no problem, accept for the wiring... Has anyone done such a swap? Do I need to buy a new harness all together? Does anyone have a diagram for this stator, or know what colors match up? I've always...

hi there just realised i have the wrong stator, what i want to do is run lights off my yx 160 but there is no 'yellow' wires only black with yellow and that goes to the coil So....i have the regulator and im wondering if i can hard wire the regulator to the coil? if not ive seen a magneto on dhz...

I recently bought the IRK kit off ebay that everyone has to try and freshin up my 70cc bike. I installed it on my chinese crf 70. The bike ran flawlessly before i put this kit on. I installed the components and ran it off my stock harness into my aftermarket rev box (didnt use the red one that...

hey guys, on my last three rides of been on i have had my chain come off go through the chain guard and into the stator snapping off the magnet first time we thought it was just because the chain was loose and came off, second time the chain tensioners where all buckled so the wheel just kept...

hi this is my first post here hope i'm in the right spot. I picked up a non running 88 ds80 for my daughter as she is out growing her 79 jr50. The previous owner said it lost spark one day and he had a friend look at it. he cut and spliced all the wires and it sat for 5 years. something seems...

Hey guys, My stator plate wires are different to my wires on my bike, (the colours) and i am kinda confused, can someone please tell me what goes to what? Much appreciated if you can! This is on the bike: This is my stator plate:

Hey everyone, I'm trying to get a stator/lighting coil for my 155z (should be the same as z160ho) to run a rev limiter. I have seen a few on ebay for around $30 (Brand Magneto Stator Coil 8POLES GY6 125 Moto Lighting | eBay), but I have no idea how to work out if they will fit or not? I know...

Hi all, I have a 160cc LE pit bite pro, I am upgrading the Magneto so I can run a front headlight, But am unsure what wires to connect where, it's different wiring then my friends 125cc pit bike, I'm unsure about the wires comming from the magneto, they are all joined into a big white...

Hey so I recently just bought a jap 90cc and when I was riding it a few days ago the stator nut that holds the magnet on the crankshaft fell off.. Well I didn't notice it fall off so I continued to ride.. When I was done I let my friend ride it aroun my block and the little like notch in the...

I got a free 50cc Honda/clone dirtbike. I guess the rotor flew apart and killed the stator and.also the cover/chain gaurd. The bike came with a new stator but o need the rotor and cover. I need help on what rotor to order and from where. Thanks for any help.

hey guys new to minriders, av just bought a secondhand quad with i think a lifan motor, it is a horizontal mount and iv had dramas with what i believe to be a timing positioning plate that is bolted to the cdi housing that goes on the outside of the magneto flywheel. it is gold in colour and...

Hi Guys, Can any one help me with a wiring diagram for a 125 ststaor. I have re wired it every way I can think, but there is still no spark.