rectifier

Hi! I've been fighting with this Lifan 125:s electrical system on off for most of this winter and I'm in desperate need for some advice. I get almost nothing from my rectifier as far as DC voltage goes and the stator outputs around 5VAC at idle and 7VAC when revving. The stator I have is the...

Hello! For start sory for my bad language skills. I have problems with my pit bike eletronics. I wanted to add headlight to my pit bike. So i wired everything up, but something was wrong and i end up with busted batery. From my strator comes out only 2v but from rectifier about 6v. Could any one...

Anyone have pics or any helpful info about motor mounts and/or electrical hookupo for this mod? I have a Lifan on its way and am preparing to remove my motor and modify the frame, fit it, and get her painted...any help would be appreciated...thanks...

Well I hit a new 160z and it comes with a 3 phase coil I'm looking for a new rectfier for it as it didn't come with one. Any ideas?

Hi, i'm on the verge of thowing this bike over a cliff, i'm trying to get the wiring sorted for the elec start, but having no luck/ i can start it by bridging the posts on the solenoid with a screw driver, but need the start button working. I found a couple broken wires in the start...

Finally getting around to repairing the e-start on a zongshen 250 engine. Sprag clutch is ruined so needs to be replaced. I will need a new battery for it but since I threw the stock battery box and airfilter cover away in favor of a pod filter, i'm now having to rethink positioning The stock...

ive got another thread related to a rec reg setup..... http://www.miniriders.com/ask-tech-masters/38211-how-setup-rec-reg-kit.html gday lads and laddies so i put the coil on.. which was supplied by my67xr.. thanks again . anyway my new coil is generating 3.5V and i was thinking i need...

I have been struggling a few days now with fitting the electric fuel pump to lifan 110cc engine. The problem is that I can get light bulb working properly, but my 12VDC fuel pump does not run. I am not using battery on my setup. I attached a regulator to the engine, using this wiring guide...