throttle

Since I installed a new throttle controller, whenever I start my bike and turn the choke off, the bike shoots off at full throttle. I can’t find anywhere to show how it should actually be linked up, so does anyone have pictures of their arrangement? If not, is there anything online? I also...

Hey mini crew, Bike: Dhz 160 Engine: z155 Carby: Stock (mikuni 22mm i think) Problem: Bike idles and runs fine 90% of the time. If I snap the throttle it seems to flood the carby and not clear itself out. Example: Cruising along everything is fine, missed a gear and accidently revved...

Get Your votes in Jan/Feb FOTM is live! <div style="background:rgb(20,20,20);min-height: 300px;width: 760px;padding: 10px;text-align: left;"><div style="height:40px;line-height: 0;"><div style="color:rgb(20,20,20);background:#1382DA;width: 40px; height:40px;float:left;line-height...

Hey guys. I currently have a pz27 on my lifan but it seems that it may be too big as it bogs under full throttle from idle. I have researched and found that a smaller carb may be better for the 110.

i have an apollo 007 dirt bike/pit bike. the throttle is fine when im cruising around but when i go to pull a wheelie it bogs out. I adjusted my throttle to see if that would work but it didnt. im not sure if i need to clean the carb out but if anyone has an idea

Hey yall.. got a new 7Z RED CNC 7/8" THROTTLE CLAMP SDG SSR CRF70 KLX110 107 110 125 PIT BIKE CL05 and i tried to install it but it seems like my throttle cable is too small? the wire inside the rubbering throttle doesnt go around the throttle inside for me to close it up to twist.. i...

Hey yall, ive been here for a few years, was done with pitbikes for awhile, now im in the USA visiting/living and i got myself a new Apollo ADG 125cc Pit bike CRF70 Sized frame, its brand new 2014..and yrs back when i had my old Monster moto i tuned the carb up with the whole mixture/idle screw...

Hey guys I have a crf50 that has a 133cc engine from a motovert and the throttle doesn't spring back when released. I looked at where the throttle cable goes into the carby and the cable is bent up between the carby and bottom of fuel tank. Has anyone had this problem before and is there a...

my 200cc ducar has just had a new mikuni carby fitted ,new spark plug and new fuel lines and filter also I drained the fuel and put fresh fuel in it .. the bike starts well but anything above 2/3rds throttle it completely runs out of puff and crackles and farts etc does anybody have any ideas...

Has anyone on here converted there pw50's to single throttle cable and done away with the oil injection? If so how did you go about it and what cable would or did you use?

Just bought my girlfriend a new atomik fuse 125cc. Firstly after setting it up and fueling up it started pouring fuel out of the drain house on the carbi flout bowl. Secondly got it started and it's running like absolute crap!! Any info on why it's so out of tune ? It really was not liking it...

Bought a 24mm with powerjet oko copy recently. Then bought a 100 main jet and 36 pilot jet. the throttle response is much better than the mikuni 26mm (from DHZ) but there is a problem with the idle. It is idle very high (>3000rpm vs 2000rpm with the mikuni), the idling screw all the way...

Hey guys started hearing what sounds like a dry lose bolt coming from the motor. its an internal noise. I know its nothing to do with the head as ive recently had it off due to carby issues. The noise is there from start up cold to hot and just when idling. A little throttle makes this sound go...

Hey , can anybody tell me what is a good brand of a 1/4 throttle? Is CNC alright or a joker aluminium throttle? Aluminium 1/4 Turn Joker Throttle RED Thanks

Hey, what is the difference between the 1/4 and 1/8 throttle? I am not going to be racing my DHZ dpro 160cc pit bike, I'm just buying one to muck around on. Cheers