yx140

Gday this is a thumpstar frame that i'm currently building up from scratch, with help from a donor bike that i have been playing with beforehand. Thumpstar billet hunge frame YX140 full manual Nibbi throttle VM26 chinese ASV levers CRF50 plastics Woody graphics Miniracer bars 12"/10" wheel...

Hi, this is my first post on a forum, i recently bought a 140cc "demon X" pitbike, it has had a full engine rebuild by a semi skilled mechanic who i trust to have done a good job, i have cleaned the carb out and it has all been put back together. I started all the work because it was running...

I've recently bought a Slam MXR 160 (YX 160 engine) and think it's quite sluggish more like a 140, I think it's got a mikuni 30mm on it, but the cheap one with the flap switch choke it's like 20 quid on eBay I think it's what it comes with from new this may be the culprit, what's a good carb or...

Hi I have a question regarding the fitment of a high compression piston to an otherwise stock yx140 engine +( oko26 s38 m96 ) (outer rotor kit ooracing) This piston I bought from DHZ ( 56mm 13mm pin). can I fit the piston with no worries or is there anything else I should do? thanks in...

Got a PSTO in at workt he other day with a rattly engine, being a yx140 I thought the slinger bolt had come loose, so I pulled the case off and well I must say it was a lil messy. The slinger had fractured to the point it became separated from the crank and got jammed between the case and...

I just put a head back on my engine after I have reseated the valves and put in new piston and rings after a quick hone of the bore. Put it all back together and I have 0 compression. There is no leaks through new head gasket and head bolts are tight. So what is it? My thoughts are on the...

http://www.youtube.com/watch?v=ILvFDhWWdFE

hey guys, this is my current setup, old pic but pretty much the same Im wanting to change the perimeter frame to a normal chromolly klx frame. im pretty keen on an Atomik as they are $137 shipped Chromoly Frame KLX style EK36 Im going to be pairing it with a DHZ alloy swinger...

alright so my mate wants to swap my yx140 big bore out of my nitrous for his zongshen 150 ? is it a good swap should i do it whats the differences? and which one is generally the better motor ? thanks guys it wasnt getting answered in the tech masters section so i thought id post it here :\...

alright so my mate wants to swap my yx140 big bore out of my nitrous for his zongshen 150 ? is it a good swap should i do it whats the differences? and which one is generally the better motor ? thanks guys :)

howdy guys just looking for a boyesen ignition cover to fit my 160 pitsterpro any one got any links