z155ho

Hello,i am new here! I have asked this question in many forums like thumpertalk.I am thinking about getting YX160 or Z155HO.I dont know which one to choose.The engine goes in road/offroad bike with 17/41 gearing.The engine would be maintained properly with top ends and oils and valve...

an engine i worked on had a lot of rubber in the oil filter strainer down the front/bottom of the r/h engine case so i thought i had better check the clutch basket. it looked ok, but when i held the alloy basket, i could move the gear on the back forwads and backwards. that shouldn't happen...

i thought i'd make a thread for anyone wanting to convert their Ignition's to the Daytona / Lifan 150 Adjustable Outer Rotor set up on Zongshens etc this is the basic Outer Rotor kit to suit a Daytona 150 / 190 or Lifan 150 that you'll need to do the conversion. or you can buy the more...

Hi I recently bought an YX150 engine and...There is a small hole near intake manifold. Can anyone explain what it? I'm puzzled?

The following improvements have been made to the KLX110 style V2 Race Head: - Now comes with forged aluminum roller rockers - Bushings rollers have been replaced with a bearing rollers - Intake valve is now stainless EV8 like the exhaust valve Also, there is no price increase on the...

Well I hit a new 160z and it comes with a 3 phase coil I'm looking for a new rectfier for it as it didn't come with one. Any ideas?

Ok just the easiest thing to edit, I think we're all a little tired today! Will be posting up some youtube vids of it once I have enough energy to edit them!!! Hope some others got out for a boot this weekend? Was a little warm and dusty but hey, still a lot of fun!!

Wanna know if my tb head off my yx160 fit a pitster pro z155?

Hi all just got me hands on a small pitty with 12 inch rims and a smaller farm compared to my yx 160 Bigfoot. The bloke I got it from said it was a pitster pro 160 r spec engine. I looked at the barrel and it's stamped z155. He said it came from dhz not sure if he's talking about the bike or...

Hey all I gotta get a new LHS engine case for me yx 160. Anyone know if there's differences in them? I read a post in hear a while back where someone got a new one and put the motor back together and had shifting problems. What I remember is it came down to a casing mismatch. Anyone shine some...

Racing NGK Ignition Coil Pack 110cc 125cc 150cc 250cc ATV PIT PRO Dirt Quad Bike | eBay is it a legitimate ngk and would it need a splitfire lead as well?

http://www.youtube.com/watch?v=ILvFDhWWdFE

Looking for your guys opinions and performance gain on and SSR 125SR i was reading thru >>>Performance upgrades guidelines: Stage I-III<<< and it says to switch CDI to a race one but which one ,any preferences on which is better then the other one and for the coils same thing , im trying to use...

Hi all,I have been on here ages ago asking probs with my engine,well 1 year later I'm still having it. To start with the motor didn't run right as it came with a Mollt carb,got a oko 26mm flat side and it still didn't run right,when I say didn't run right........basically spits fuel out of the...

Good Evening all. I have a quick question. The 155z has a auto de-comp cam. Is this correct? If so is it a possibility that this play's up and stays on when the bike is running?

has anyone got a spec list for the zongshen 160 that comes in the revolution mxs?

howdy guys just looking for a boyesen ignition cover to fit my 160 pitsterpro any one got any links

would a kitaco inner rotor kit fit in a pitsterpro 155z engine?

So I have the 09 PitPro 140XR, Changed out the spark plug to a good NGK one, but am looking to upgrade the CDI/Coil lead aswell as get an inner rotor kit. There is so many to choose from.. but the question is which is the best?? Some friends run a "SpitFire" car lead... but dont know...

hey peeps i have just put a new racing cdi on my bike and have been doing a bit of research and i hear that a better coil can compliment your cdi making a bit of a differnce in preformance but i im a bit of a kook when it comes to the mechanics side of my bike can are coils a standrad fit thing...