2006 Yamaha YZ85, lost rear brake pedal screw

[Electrum]

Hey my yz85 '06 brake pedal (rear) bolt has came out and now the brake pedal isn't held in place properly and I have no idea where to get a new bolt from? If anyone can tell me what the bolt is called and where to get it from online?

PS bolt might possibly mean screw in this context

 

[my67xr]

i am guessing part number's 14, 15, and 16 here ?
2006 YZ85 - YZ85V Yamaha Motorcycle REAR MASTER CYLINDER Diagram and Parts

here is the US list prices for them
ring Yamaha Australia and ask a price, part number etc below

14- Clevis pin- 90240-08124 $5.82
15- Washer Plate- 90201-08083 $3.13
16- Pin Cotter- 91401-16012 $3.70

 

[Electrum]

i am guessing part number's 14, 15, and 16 here ?
2006 YZ85 - YZ85V Yamaha Motorcycle REAR MASTER CYLINDER Diagram and Parts

here is the US list prices for them
ring Yamaha Australia and ask a price, part number etc below

14- Clevis pin- 90240-08124 $5.82
15- Washer Plate- 90201-08083 $3.13
16- Pin Cotter- 91401-16012 $3.70

I'm talking about the back brake pedal stabiliser screw that stops it wobbling around side to side? Only so it can go up and down..

 

[my67xr]

a photo of the problem could have helped explain what part you need

so the part that stops the pedal pivot from sliding in and out of the frame ?
#4 R Clip ?
2006 YZ85 - YZ85V Yamaha Motorcycle STAND FOOTREST Diagram and Parts

if it is, then most automotive shops would sell them, bearing shops, or even hardware shops like bunnings/mitre10 etc,
probably cost you all of 50c if they sell them singularly.
you will need to find out what size the hole is through the pivot pin, use a drill bit to measure it.

make sure you put a smear of grease on the pivot shaft before you reassemble it too.