Atomik Nitrous 125 mid

[yzkato]

So I just bought this...have a yz 125 n a kato200, so know f all about 4 strokes...I basically need some advice on what spares I should be taking with me...whats gunna break first?...Cheap chinese bike I know but its just for fun... I wont be flogging the crap out of it.

Chain? pegs? tyres? tubes?plugs?levers?...Im retarded when it comes to pittys...actually im retarded when it comes to most bikes...learning about 2 bangers is a lil easier...but then again all the above mentioned 'spares' applies to any bike...

I live northside Bris so closest PITBIKE SHOP for spares???

Also looking for people to ride with...Im female 36 n single...so dont have a guy to ask all these questions...cheers.

 

[dynamicgs]

Hey... welcome to the forum! Ive got a Mid sized Nitrous too so I can tell ya what you might need..

Tyres and tubes are total junk... replace tubes straight up, and your original tyres will last a few rides at best..

Levers are a good idea just to get you out of trouble., i broke one first time out...

Change brake fluid when you can... made a big improvement on mine.

Obviously, do your oil change before riding too....

My chain and pegs are fine, even after some serious flogging...

If your forks are no good (its a lucky dip whether you got a good or bad set) you can change the oil, or at least add a bit more to stiffen them up a bit...

Thats all i can think of for now... If you can work on a big bike, you wont have any issues working on these.. its real simple to keep up with maintenance, plus if you get stuck there are some legends on here that are always keen to help with advice..

Hope this helps!

Its a top day in QLD to ride.... Enjoy!

 

[tim_]

welcome to MR... good to see another brissy rider...

good place to start is here http://www.miniriders.com/bike-setup/24239-achtung-noobs-your-new-pitbike-you-set-up-tips.html i did and helped me out plenty..

also if you looking to upgrades and what not http://www.miniriders.com/bike-setup/24009-performance-upgrades-guidelines-stage-i-iii.html also helped me out..

if you havent got bi-fold levers http://www.miniriders.com/bike-setup/25021-sacrificial-lamb-i-mean-levers.html.. but im pretty sure all atomiks come with em now any how..

and finally http://www.miniriders.com/bike-setup/12274-tricks-trade.html

that should help ya out.. and if you have any questions on how to do something you can http://www.miniriders.com/mini-tutorials-how-tos/13363-request-tutorial-here.html

 

[isaac133]

Nice info tim! And Yzkato welcome, you will find PLENTY of information on this site, has been a huge help to me and my pitty!

Enjoy.

 

[tim_]

oh and sorry for not posting this before just remembered it while referring someone else onto it too..

http://www.miniriders.com/motor-tutorials/26318-how-run-new-engine-run-hard.html