carb help

[lildeezul]

ok i took off my carb to change the throttle cable, and i took out the throttle cable spring and the slide, and when i put it back on i didnt match it with the grove and it was stuf wide open, so it was a pain in the A** to get off, and once i did it have chipped the slide, i tryin to put the slide back in but i dont know where the grove it, i cant find anything, the only thing i see it a thing that looks like a little ball. some one help

 

[eichkay]

The idle srew should have the 45 degree cut side of the slide.

 

[mjc85]

Just sit it in and turn it until the slide drops right in, I don't see how it could be complicated?

 

[lildeezul]

thats the point i can turn it 1 whole rotation and it doesnt drop in.

 

[RD RACING]

drop the slide down abit further then turn it slowly until it feels like it wants to drop in.

 

[eichkay]

Get someone that know's what a 1/4" drive socket looks like to do it for you.
Might need to file a bad edge off, you might have bent the slide..​