Clutch problems

Mini Dirt Bikes & Pit Bikes Forum

Help Support Mini Dirt Bikes & Pit Bikes Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

monsterpitbike96

Well-Known Member
Joined
Jan 9, 2012
Messages
246
Reaction score
3
i have a pit bike 125cc lifan and the clutch all of a sudden stopped working i adjust it little bits at a time and start it up and test it the only best i can get is it not stalling just rolling please help its annoying and i don't wanna really change gears without a clutch ??
 
have you recently changed you clutch lever?

have you tried adjusting the mechanism in the clutch cover.. behind the plate thats held on with 2 decent sized star screws..

to adjust it make sure both your clutch cable and lever adjustments are backed all the way off, then in the clutch cover there should be a 10mm nut, loosen that and screw the screw in till it just touches then back it off a fraction so you can just wiggle that fork looking thing..
from there adjust your clutch cable till you can just move the lever on the front of the case about 2mm..
 
have you recently changed you clutch lever?

have you tried adjusting the mechanism in the clutch cover.. behind the plate thats held on with 2 decent sized star screws..

to adjust it make sure both your clutch cable and lever adjustments are backed all the way off, then in the clutch cover there should be a 10mm nut, loosen that and screw the screw in till it just touches then back it off a fraction so you can just wiggle that fork looking thing..
from there adjust your clutch cable till you can just move the lever on the front of the case about 2mm..

no i haven't got a new lever it was working fine in the morning than it just stopped working i tired to adjust it, it started to work ok but not as it used to is there a video so i could get an idea ??
 
Back
Top