At the moment im sorting out my sons agb29 125cc, the carb is one of the 25mm chineese mikunis. From what ive read on forum 105 mainjet is the way to go on these carbs for this particular size engine. At present the carb has a 95 main jet and 15 pilot jet. Any advice on where to get jets for these carbs, at a fair price.
Ducar 125, china Mikuni jetting
- Thread starter chidsmind
- Start date
Help Support Mini Dirt Bikes & Pit Bikes Forum:
chidsmind,the main jet should be available from any good bike shop,the 105 main is the go.
Forget the pilot jet it will be fine and you will have trouble finding pilot jet's leaner than the No.15 you have now.
Oh and if you pay anymore than $15 you've been ripped!!!
Forget the pilot jet it will be fine and you will have trouble finding pilot jet's leaner than the No.15 you have now.
Oh and if you pay anymore than $15 you've been ripped!!!
Quick-Prox
Well-Known Member
i got a 105 in my agb29 and i am goin to put the 95 mainjet back in and i want to see howmuch power difference the 105 made. cause i really want to put the 105main in my bros atomik avenger (lifan) powerd. but the 105 main in my agb29 goes good top end so you should go with the 105 main.
cheers
cheers
Cheers for the help, ended up finding a mikuni dealer that sells jets in Townsville, worked out at $8.80 each. Put the 105 main in runs sweet, also changed the pilot jet to a 20 and coming out 1 turn on the mixture screw, made the throttle response bit more crisp and the bike run a bit cooler. Main jet I got for the chineese mikuni N100.604-105u, known as the large round, VM28/486-20 for the pilot jet.