Frame Snapped! Whata C#@nt!

Mini Dirt Bikes & Pit Bikes Forum

Help Support Mini Dirt Bikes & Pit Bikes Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

Franky

Well-Known Member
Joined
Apr 21, 2006
Messages
1,001
Reaction score
0
hey guys, i have a atomik 125cc usd forks alloy swing arm.. single spar frame.. the oldschool frame not the new shinny one.. cbf getting model name, anyway the support bar under the rear mug gaurd snapped on both sides, ( stupid cheap $#@#@#@ ) what metal is this? what welds do the bike have oxy weld or electric weld? should i just reweld and put a support bar in thanks in advance.
 
if it's one of the olde bikes a think they are just midl steel, if so a magnet will stick to it, i'd just electric (stick/mig) weld it back into place.
 
Hey i have had 4 atomik avengers n two atomik Ax. i used to jump my AX and race my old Avengers my frame never snapped but when i first got an avenger the frames were alot weak r then now. my one now is like they have welded it all over again.
 
yea man i have a orion 125 the frame snapped right under the tank and it is comptly f><ked and now the engine mount has snapped lol
 
Never had any drama's with the thumpstar billet alloy frame, bit heavy but im glad i went this way..
 
Yes. The thumpstar frames are very strong. No wonder why they have a massive price tag ;) . Well i'm having troubles making my suspenction stiffer. i think i am supose to turn the thing to make the coil shocky tigher but atm i cant take plastics off. it's just not working for me and its so cold in our games room where it is.
 
The Plastics
2 alen key screws under the seat, is the starting point for getting the plastics off... then the 2 on the tank shrods and then the two little plastic clips on the shrods at the front of the tank and thats it.. pull the rear gaurd back and the seat and plastics will come with it...

All the plastics mount upto the seat.. Hope that helps.

The Rear Shock
I tend to take the shock off the bike and can normaly spin the nut by hand by holding the spring and nut at the same time with one hand and spin the shock body around with the other hand.
 
thumpstars are cheap copys aswell.. just the better qaulity versions of mini bikes :)
 
motovert expert, pro, type r. they are good pit bikes


yeh. i recon they are fantasic bikes.


thumpstars are good but i need to tighten my suspenction so it doesn't bottom out(haha) well yeah thats for the help i willt try and see what happens:confused:
 
yeh they are. all chinese bikes have there faults. i'v had mine for only 3 months and nothing has gone wrong, i stacked it and riped the lug of that holds the back plastics on. motor mechanically a1 oh and just a punctured tyre
 
Back
Top