Gears

[daniel40]

hey everyone i was riding my bike and i was in second gear and i was going to stop and i went bak from second to first then it woudnt go from first to neutral i had to hold the cluch in and roll it a bit for it to go back to neutral does anyone know how to fix this???

 

[synrgy]

Try tightening your clutch cable, the same sortof thing happened to mine i always had trouble getting from 1st to neutral.

You can tighten in 2 ways, unscrewing the screw at the end of the cable near the leaver and there is also another section along the cable you can use to tighten it.

My bike has no trouble going from first to neutral now.

Does your bike try to move forward when in first and the clutch lever is pulled right in ?

Mine did that untill i tighten the cable.

 

[crazzy #1]

u usualy just role it back and forth 2 try get into neutral! with bigger bikes i have problems finding neutral... there is nothing wrong with them, i just pull up too hard

 

[daniel40]

yeh it moves abit when i accelarate in first

 

[synrgy]

No i mean does the bike try to move forward when its in first and idling ?

My clutch wasnt fully disengaged so tightening fixed this.

 

[Hillz]

my AGB-29 is hard to get into nutrual too... i just put it down to china crapo

 

[daniel40]

yeh thats wat i ment when the clutch is in and its in first