Help Needed No Rear Hydraulic Brake Pitpro 140

[grc speed racer]

Hi Guys

I need some help PLEASE,i went to go for a ride today on my PitPro 140.
I dont have any rear Hydraulic brake.
I pulled everything apart i cant find anything wrong.
The piston in the rear caliper doesnt seem to move IN OR OUT.
My brake pedal goes all the way down and nothing happens.
I have bled the back brake and still nothing,There is plenty of fluid.
It is pissing me off,Please can anybody help me.

Thanks in advance

Marty

ALSO HAPPY EASTER EVERYBODY

 

[RB-125]

hey mate try bleeding the brakes a bit longerit took for ages on my dad's bike.

 

[Flarry]

This happened to me, first make sure the disk is dry and theres no oil or water on it or anything, the caliper probably is moving. When the brake pads are new they are super smooth, take them out and sand paper them a bit and make them rough. The rear brake on pitpro is really soft on mine too, I have to push the brake pedal soooo hard to lock up the wheel...

 

[Squeeby]

weird.. mine locks with ease.

 

[KTMKID]

same... but my front brakes are so plush... i cant endo or nothing...anyways im more of a racer than a stunter so yer

 

[crazzy #1]

i remember having the same problem with my front... but no matter how much i tried 2 bleed it i couldnt get the fluid down to the brake system, it was just full of air!.... so i got a syringe filed it with fluid and pumped that into the bottom of bleeder valve... and it filled the lines with fluid and the resivor

 

[cass38a]

Use a 60ml catheter tip syringe and a bit of tubing. Try to get the brake line straight with no hight spots for air bubbles to get trapped (take the caliper off if need be) and fill the succker up like crazzy said.