i got my new pitpro le today an

[bbr_maggs]

its awesome bike go's nice shocks are pertty good
just needed to no what i need to do to the oil cooler like does it need oil or some thing plz tell cheers macca


btw: all the bikes i have had i cant seem to get the handle bar bolts tight i need a better alen key cheers

 

[geezus18]

hey all u gotta do is put the same amount of oil that comes out of the bike back in when you do an oil change. The oil pumps around the motor and to the head where it passes through the oil cooler and then enters the engine again. So to answer your question the oil that goes through the oil cooler is the same oil that you put into the engine...and id get the right allen key to tighten your bars. I learnt the hard way today and did a massive nose dive and my bars shifted forwards and they were prettty tight. im guessing they have to be rock solid..mind you i came down hard and fast so the force had to be exerted somewhere as the forks already bottomed out (firts time ever )

hope that helped, Michael

 

[bbr_maggs]

btw thanks for all help
an how do i to oil change on motor an oil cooler iam new so would be gr8t if i new thanks its a lifan 125 the new 1

 

[FULL-ON]

to change the oil just undo the nut at the bottom of your engin let all the oil drain out put the nut back in and fill it back up and you should be right

 

[motoluver]

Warm the motor up. Undo the dip stick. Undo the sump bolt under the motor. And then your done...