Lifan 125 wiring to stock honda xr70 harness HELP

[powerwagon77]

Hey guys I recently bolted up a lifan 125 to my 1999 xr70 and im having a little problem with the wiring. So I am unsure where:

- the blue and white wire from the lifan goes

- the green and red wire from the lifan goes

-the blue and yellow connection on the 70 harness goes

-and lastly the green wire from the killswitch


I heard that the white wire and the yellow wire are for lights so disregard those.

please guys any clues would help I am not an electrician.

Here are some pictures

 

[my67xr]

Welcome to Minirider's.

Drop in an Introduce Yourself here- http://www.miniriders.com/general-chat/20824-introduce-yourself.html

It look's like you're almost done.
You just need to connect the Blue w/White from the stator, to the Blue w/Yellow from the main loom
The Green from the kill switch need's to go to an earth point on the frame.

You can just tape the Yellow, White (lighting/charge) and the Green w/Red (neutral start/neutral indicator) back to the loom so they cant short out on anything.

You know the ignition coil wire's i guess, Black w/Yellow and a Green


Cheer's, Craig

 

[powerwagon77]

Alright man I will complete it when I get home! Thanks a lot for the info because I was lost from that point on. I can't wait to get this thing up and running, just waiting on a few more parts. & I will be sure to go Introduce myself!

 

[powerwagon77]

one last thing, that blue w/ yellow has the same connection as the blue w/ white from the stator. So how should I connect them?

 

[my67xr]

https://www.google.com.au/search?q=...m=isch&q=crimp+on+bullet+terminals+motorcycle

Amazon.com: motorcycle bullet terminals

You could cut the male end off the Green w/ Red striped wire and cut the female off the blue w/White wire and then solder the male plug onto the Blue w/White wire

Or buy some crimp on bullet terminal's from your local car part's shop, cut the old end's off and crimp the new end's on.

Do you have a motorcycle electrician near by ?
They would sell you the correct end to fit to the Blue w/White wire from the stator

[/IMG]

 

[velociraptor]

Visit dratv.com he has full wiring diagrams and sells lifans for Honda's ect

 

[OzTambo]

I want to pass on a big thank you this is the only place on the web I could find the correct working for the Lifan to go into my daughters XR70 ...

In case any body wants the details from above laid out a bit easier..

CRF 50 / CRF 70 Engine had a
Blue & Yellow
Black & Red Wire

Lifan 125 Engine has:

Green
Green & Red
Blue & White
Black & Red
White
Yellow

Thanks to group above the correct wiring

Black & Red ------- Black & Red
Blue & Yellow ------- Blue & White (Cut end off and add Female Bullet)
Green ------- Plugs into harness with Green Kill Switch (Double connector on harness)


These three are not used.
Green & Red
White
Yellow

thanks guys..