mod time for my pitpro110

[Divy]

ok well im going to start to mod up my pitpro110 after i pay my fines an fix my yz fork seals,
im gonna buy some high bars when i can find some an change the rear sprocket to 34 tooth so my gearing will be 16-34 instead of 14-37 im also having trobbles finding the sprocket too
i also want to do something with the exhaust any ideas?? can i modify my original one to make it more free flowing or louder or do i buy a aftermarket one if i should buy an aftermarket one were would i find one that would fit my bike?? an when its on do i have to adjust the carby

p.s i also might get a fast50 stickerkit its black with pink flames but ill see how much money is left in my pocket after i get all the other parts

 

[unit_mx]

The closest i think maybe your gonna get to a 34 tooth sprocket is going to be a 35 tooth sprocket and red baron make them in solid aluminium (black or silver) for $80.Not to sure about the pipe maybe take the baffle out ,otherwise suttos mc has a great sale on big gun evo pipes at the moment and they have 1 to fit a crf50 which should fit your bike for $265 or something close to that ,there good pipes and look real nice cause the tip is anondised red.If you really want to fine tune your machine a few miner carby adjustments may be needed but the a whole lot

 

[unit_mx]

,not sure if that will work

 

[Divy]

i tried to find a website that sells red baron sprockets but couldnt find one
do you know what site you saw them on unit-mx??

 

[unit_mx]

i have a red barron catalog and have the 2006 range pricing from there australian distributor oz50 get in contact with craig maudsley (head of oz50) on his email: [email protected] , phone: 61 7 55379322 ,or his fax:61 7 55375433 or you can always visit oz50s web site which is www.oz50.com.au ,there based in brisbane qld if it helps