my ride

[jamie__1221]

hey jst showing my bike bike its not the best goin round but it gets me around umm.. its a lifan 125cc, ngk spark plug, uni filter, re gased rear shock an rasied, breather kit, ported intake, exausht weld grinded out, heavy duty clutch cable,got the carby it flys now, changed oil , new back tyre, takegawa hyper CDi fitted runs better more response, 39th rear sproc pro billet and 14th front its set up for trails not top speed ..lotsa little things..
futre mods:
inner rotor + oil slinger, head ported..

any ideas are welcome thanks...

 

[jazle]

hey man nice ride. what kind of bike is it is it?

 

[jamie__1221]

ahh its a moto-x off ebay l0l... u hav toi keep it well maintained

 

[mad man]

cool get a high seat and cut ya mud guard down and it will look sick

 

[FULL-ON]

[... u hav toi keep it well maintained[/QUOTE]

I here that

 

[jamie__1221]

FULL-ON do u have the same bike or something

 

[jamie__1221]

jst wondering if anyone has had experince with these bike and would be able to tell me what to look out for and ways to prevent stuff thanks......

 

[50s BRotherhood #1]

i've got the same bike and hav had no problems with it that i havnt caused but i hav been told the frames bend fairly easy.. also rust gets into the frame quickly coz of the sort of steel so yeh as u said keep it well maintained

 

[FULL-ON]

FULL-ON do u have the same bike or somethingno but I do have a chinse ebay bike and its the same mantice all the time.

 

[Bones]

just keep it well maintained. while this is easy enough to understand there are a few things i would recommend straight out of the box. one of them would be the chain, unless you want to constantly adjust rear wheel length to adapt for chain length you should get something like a DID chain or RK gold chain.

by well maintain, keep it clean all the time, oil her up all the time, check your spokes after each ride (just quickly), check your nuts and bolts. make sure you do a pull down in the intitial stages and locktight all your nuts and bolts that require it. other than that you should be fine just keep checking stuff because unfortunatly if you buy on the cheap it does need a little more tlc unlike the 2k + bikes.

Cheers, Tony.

 

[50s BRotherhood #1]

well said bones.... yeh get a chain quick... my friend bought a bike off ebay and the chain snapped on his 2nd or 3rd ride ans caused like 200-300 bucks worth of damage

 

[blingbling121]

chopper much ?

 

[jamie__1221]

thanks for the info everyone.... do use belive the frame will bend?????

 

[jamie__1221]

well i got the carby now it goes 100% better and new back tyre grips lik no tomorrow and takegawa CDI is on its wayy

 

[Mazza]

do use belive the frame will bend?????

Shouldnt unless your jumping it a decent distance, for just trashing it around you shouldnt have to much of a problem, Like you said just keep it as mint as possible and itll last ya a good length of time

Even if it does chuck it in towards the end of next year it wont really matter as ull have got more than enough fun outa it for the price ya payed!

 

[jamie__1221]

yeh true that mazza

 

[mad man]

well you won't bend the frame much. That dude on the forum was hiting massive jumps on his with only upgrade 15mm axles and anodised rimz

 

[jamie__1221]

takegawa hyper CDi fitted ( what an arse hole it took neally all day to wire up but finally got it) runs better better throtle response and mid-range power is increased a lil.

 

[jamie__1221]

i got the 39th sprocket on the back now heaps more pulling power im realli happy wit it its changed the bike heaps oh its also got a 14th on the front....