Need help with my Pitster pro

[mans]

Hi guys, im new to this forum
Just got myself a pitster pro 2008 model
Need help trying to source a right side foot peg and mounting bracket which mates up to bike frame

Also the bike has a 160z brand new motor and i have snapped one of the pressure plate mounting points( holds spring and bolt for clutch) on the clutch system
Can i buy this part seperate or do i need a whole new complete clutch
Any help greatly appreciated....Thanks

 

[rhysieboyy]

man's i have a HD footpeg mounted powdercoated black its crf50 so if its any use to you pm me,as for the clutch issue you should be able to buy a clutch basket seperately
Geeco Billet Clutch Basket
is that what your after?

cheers,
rhys.

 

[sean01]

Hi guys, im new to this forum
Just got myself a pitster pro 2008 model
Need help trying to source a right side foot peg and mounting bracket which mates up to bike frame

Also the bike has a 160z brand new motor and i have snapped one of the pressure plate mounting points( holds spring and bolt for clutch) on the clutch system
Can i buy this part seperate or do i need a whole new complete clutch
Any help greatly appreciated....Thanks

will need pics of your bike mate or at least the proper model.
pitsters have like 3 or 4 different footpeg mountings..

as for the clutch hub, try get a secondhand one or buy a new clutch.. they are cheap enough...

the billet one above is pretty expensive

 

[mans]

Pitster pro, need advice

Here is a copy of the bike model that i have, i have circled the foot peg and mount in red. This is the style i require. I need the peg and the mount as well. I purchased the bike and the right side peg/mount was mangled.

I have also circled the part of the clutch system that i damaged in the 160z motor
Can this be replaced seperately or do i need to get a complete clutch system.
Thanks for help

 

[sean01]

yep looks like an X4R, contact dhz if you in oz or pitster pro usa if your in the states... they will have both the items your looking..

also im pretty sure there is a build plate on the head stem of the frame. it should say what bike it is

 

[mans]

Pitster pro

I dropped bike off today at DHZ sydney. They will take care of clutch however they said it might be difficult to find the foot peg and mount. I thought that Pitster pro has good aftermarket and spare parts support. Hope they can source original part for me

 

[sean01]

dhz/ pitster pro aus do have good support but i guess it could be that some parts just aren't stocked as they never sell any of them.. how ever maybe they can air freight one over for you if you ask nice enough... cause obviously the bike is worthless without one..

 

[The_GDFP]

There are mounts on their site that will work. Might have talked to a new guy, or one that needs replacing

 

[sean01]

yeah these look like they could work if the bolt spacing is correct but i dont think they have the reinforcing bar that runs thru them..

 

[mans]

yeah these look like they could work if the bolt spacing is correct but i dont think they have the reinforcing bar that runs thru them..

I think this is the part i need, did you find this on pitster pro website?
Appreciate all the help guys.........

 

[sean01]

that is from the dhz web site.. its for one of their own model bikes i think..