Pitbike riding, testing the anima 190 fdx

[K.Jansson]

Here is some gopro footage from a pitbike training camp we had yesterday. The footage is from a part of the bigbike track. Riding my pitsterpro lxr anima 190fdx.

What do you think?

[video=youtube;JEHOwhprBWE]http://www.youtube.com/watch?v=JEHOwhprBWE[/video]

 

[DHZ_XR8cing]

Cool video mate. Track looks like allot of fun

 

[Styv_Loosekid_21]

the question here is "what do you think"??

 

[timeeh]

Nice vid mate, looks like she moves along quite well.

 

[Styv_Loosekid_21]

id really like to know what you think of it as im in the same boat with same setup as this. what carb are you running?

 

[nickv1980]

id really like to know what you think of it as im in the same boat with same setup as this. what carb are you running?

Ive got and ran both .. PWK 33 seems like its got potential couldn't get it running great at all ran extremely rich seems better in the higher rpm range wouldn't kick start could only clutch it the downside ... needs custom mani and a needle thats proven hard to find plus re-jetting

The PE28 .. came with correct jetting needs a jfq needle comes with a jfn needle which will work fine and theres manifolds to suit it everywhere its super easy to tune and gives a really mean bottom end punch, smooth idle , easy starting and great transition through-out the rev range i cant keep the front wheel down in the first 3 out of 4 gears the torque with the 28 is huge

 

[Phil67]

Track looks awesome, but whats those black things in the cages? Cause that's the first thing i would collect!

 

[zwebx]

Track looks awesome, but whats those black things in the cages? Cause that's the first thing i would collect!

agricultural water supplies...
pretty smart so they can water all of the track w/o draggin a hose over it

 

[K.Jansson]

No the cages is for the guy with the flag. They are sitting in there, so they are little more protected. There is water sprinklers sticking up at the side of the track.

The track is pretty nice, shame we dont race that track. They have a minimx track we're racing. The minimx track is very good also

 

[rotn50]

Awesome stuff mate, thanks for sharing. So your running a pwk33, are you still running the manifold it came with and have just made an adaptor for the carb?

 

[K.Jansson]

Awesome stuff mate, thanks for sharing. So your running a pwk33, are you still running the manifold it came with and have just made an adaptor for the carb?

Yeah, with this bike (practice bike) i cut and rewelded the intake and just used the rubber boot that ycf supplied.

My race bike will have the carb turned down and using a vm 32mm intake boot + and adapter to make that boot fit the stock intake. I will shop picture on my build thread!