Rear Break Leaver

Mini Dirt Bikes & Pit Bikes Forum

Help Support Mini Dirt Bikes & Pit Bikes Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

pumba

Well-Known Member
Joined
Mar 15, 2006
Messages
102
Reaction score
0
Location
Melbourne, Victoria
Hey i had 2 good stacks and have bent my break leaver badley. Im going to straigten it but am going to look in to a stronger better one.

Dose anyone have any suggestions on a stronger rear break leaver
 
sometimes its better if a componant bends and not breaks another part. say your rear brake lever for example, if this didn,t bend from your collisions, what else would have been bent or broken ? and how often will this occur ?
 
Depends on whate sorta brake pedal you got ....RD has a good point and fenton's approach will work too ....I usually heat my bent brake and clutch levers with a ciggy lighter and bend em with a ring spanner , you'd be suprised how many times you can get it back.This might not work on your back brake lever but you should be able to straighten it out with something .

Also an after market over the top style lever will reduce bending if you are not running one . I reckon they have a better feel too.
 
Back
Top