rear shock?

[red_demon24]

hey guys my rear shock on my agb29 is to soft i weigh about 70kg/11stone it has a valve up the top to pump air into it and was wandering what psi i should run in it and can you just use a pump for pumping up MTB forks and whith the front forks on the agb29 what are some ways i could make them a bit harder apart from adjusting the twisty things (forgot what they where called lol) on top of the forks.
cheers guys.

 

[SnItChY]

the twisty things on top of your forks are air bleeders

you can let air out that builds up in your forks arfter a ride ,,, they dont work hehehe

to stiffen your forks u need to change the oil in them or also do the spring

as for youir rear shock youll find that that air valve u can see is leaking and u now have no air in the shock

u need to take tha shock out and take the valve out and fix the leak i did this with some glue then screw the valve back in andjust pumped it up

works fine for me

try that

 

[red_demon24]

nar i dont think its leaking it is just to soft its not really bad i just wanted to make it a bit harder.
p.s. if it was leaking would it bottom out or nearly bottom out when you sit on it