shock, which one?? 270mm will fit???

[Divy]

ok well im going to jump on ebay now an buy a irk from dhz yey

ive been looking at some fastace rear shocks an the one im thinking of getting is 270mm but im pretty sure the pitpro138 stock one is 280mm
so how will the 270mm go on my bike
i was also thinking of this one cause its cheaper
here are the links to both let me know what you all think
http://cgi.ebay.com.au/ws/eBayISAPI...MEWA:IT&viewitem=&item=260078995008&rd=1&rd=1

http://cgi.ebay.com.au/ws/eBayISAPI...MEWA:IT&viewitem=&item=230055077076&rd=1&rd=1

 

[Divy]

also i need a fly wheel puller so if any one knows were i can get one let me know please

 

[CHINGArider]

Im pretty sure both those shocks are ment for triangle type swingarms and are only rated at around 500lbs. Ud should be looking for one thats 280ml which is what mono swing arms usually have and are rated at around 1000lbs

 

[CHINGArider]

Check out the fast ace shocks at elstar s.com there the cheapest ive seen around

 

[Divy]

ok thanks i will

how about the flywheel puller??

 

[THUMPY125]

ebay, i have seen a few for abot 8 bucks i reckon.

 

[Divy]

i looked on ebay an havnt seen any
got tha link??

 

[THUMPY125]

not the same one that i mentioned but this guy will make one for your bike at a cost of $25.

http://cgi.ebay.com.au/Flywheel-Pul...ryZ32628QQssPageNameZWDVWQQrdZ1QQcmdZViewItem

 

[NinetySix]

go to a bike shop and sling them a few bucks to pull the flywheel off

i just fitted a 280mm 66AR fastace shock to my pitpro outlaw, fit like a glove exact same dimentions as the stocky

 

[Divy]

oh how about this shock??
http://cgi.ebay.com.au/Pit-bike-Min...ryZ29705QQssPageNameZWDVWQQrdZ1QQcmdZViewItem

BS-58RC fastace

 

[CHINGArider]

Mate check out the site I posted you can get the BS66AR 280ml cheaper than any ebay seller.

 

[Divy]

yeah i know but its only $20 more that dont bother me,
i dont want the bs66ar cause its red
whats better or are they the same bs66ar bs58rc?????

 

[NinetySix]

wow those prices are pretty good, i coulda saved a few bucks last week

 

[NinetySix]

you need a 280mm shock or its going to sit like 2" lower, a small change at the shock can be a huge change at the seat (maybe not that much)

either buy a proper magneto puller or just go to a bike shop, i did it today and the guy had a perfect tool that screwed into the flywheel and then pushed down on the bolt, took a few seconds.

 

[Divy]

how can the BS-58RC fastace be for a triangle swinger its 280mm from eye to eye
http://cgi.ebay.com.au/Pit-bike-Min...ryZ29705QQssPageNameZWDVWQQrdZ1QQcmdZViewItem

 

[Divy]

so if its 280mm from eye to eye it will fit my mono swinger
please check it out on the link an tell me if im correct please cause i dont want to buy the wrong one

 

[CHINGArider]

how can the BS-58RC fastace be for a triangle swinger its 280mm from eye to eye
http://cgi.ebay.com.au/Pit-bike-Min...ryZ29705QQssPageNameZWDVWQQrdZ1QQcmdZViewItem

yeh that one will be fine.

 

[NinetySix]

double check the specs on the fastace website

 

[Divy]

ooow that was a good idea ninetysix cause i was gonna buy it tonight but i checked the website an it says eye to eye is 270mm not 280mm
that was a close one
damn i need a 280mm but i dont want it red

 

[NinetySix]

then dont buy a fastace