snaped

Mini Dirt Bikes & Pit Bikes Forum

Help Support Mini Dirt Bikes & Pit Bikes Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

Charged_Zook

New Member
Joined
May 16, 2007
Messages
2
Reaction score
0
hi guys i am new to this so dont no really what i talking about but i i was riding My Atomic ProX 250cc and i took it for a jump about 1 m off the floor and i landed and snaped 2 rear bolds that hold the cog on to the rear wheel...

i was woundereing will a better rear whell fit my bike, like a yammaha or suzuki or sumthing like that......


also what chain is recomended to get in placeing it.... any specs would be appreciated...


thanks all...


peter
 
sorry but do you mean the rear sprocket snapped off your wheel's hub.
pics would be good too if you got them
 
I don't think that the jump was the cause of the bolts snapping, they were probably loose to start with.
Did your chain come off when it happened?
As for fitting a Jap rear wheel to your bike, it depends on a few things. Like hub size, brake set up and so on.
I would suggest replacing the bolts that were snapped off and make sure you locktite them. Locktite everything that has a nut or bolt on it. It will save you some grief later on.
 
bah hahaha, so many people have asked me if these bikes can handle jumps, so now you have the answer!

but i would try to modifi a jap rear wheel, then it will be tuff as
 
Last edited:
but i would try to modifi a jap rear wheel, then it will be tuff as


So something else will snap. :D

Fitting a wheel is just a matter of trial and error, i doubt many people have tried to fit anything to your particular bike, so take your wheel down to a wreckers and see if they have anything with similar hub widths and sprocket and disc spacing.
 
Back
Top