totaly confused

[allen2012]

hi could some1 please help.i took the wheel of the tdr pro 150 to change the back tube.my little boy was playing around andthink has lost some pieces.ive the rear shaft and two spacers big and small.any 1 help me with how i fit it back together with the rear brakes.pics or anything will help me or even where i could get a diagram its really annoying for the kids they want to go for a spin:cheeky-smiley-031:

 

[rotn50]

put the axle and rim in without the spacers and centre the wheel with the shocky, then you can see which spacer goes were and if your brake bracket has a spacer attached it should sit up against the swingarm, make sure the caliper is on the disc and the bracket is in the stopper on the swingarm when putting the axle thru

 

[allen2012]

cheers mate.i tried that.i put a big spacr on the sprocket side and the little on on brake side but there seems to be somethings still missing to much room like its missing anoter spacer

 

[rotn50]

sometimes there is a 4mm wide spacer that sits between the brake bracket and the swingarm, with spacers in make sure that your brake bracket is parallel with your disc if not then there maybe that little spacer missing

 

[android90]

U can use "washers" as spacers also , just measure inner diameter and figure out how many you need

 

[DHZ_XR8cing]

The swing arm has probably spread open a little and leaving a gap