WTB stator plate to suit yx 160cc

[DustyFork]

I'm lookin to buy a stator plate for 160cc yx. I don't need magneto. Also may need 5 pin cdi

 

[rotn50]

theres a couple of types, the lifan 140 statorplate is being advertised on ebay as a yx 150-160, would you settle for that. This is the one mentioned.
MAGNETO STATOR ASSY KIT LIFAN 110 125 140cc, YX 140 150 160 cc PITBIKE | eBay

Then there is this one which is also for the 150 160 yx.
Rear Earth Dirt Bike Magneto Kit, universal for all 50-160cc dirt bikes | eBay

You will need the magneto and stator as they have different dimensions and not any flywheel fits
Or do you have a picture of the current flywheel you want a stator plate for?

 

[DustyFork]

Thanks for that info mate. I've searched ebay but there quite dear. I brought an irk and bike is not running good so I need a standard ignition set up to test. I want to get an Lifan ork and fit that eventually.

 

[rotn50]

Lifan ork is not a prob, i can get you the magneto and stator plate and a cdi all 2nd hand but in great condition, I can do $40 which includes post to where ever you want in Australia, postage will be over 500gr so will be $14 and the stator, magneto and cdi will be $26, so a total of $40, magento and stator is near brand new and cdi also.

 

[DustyFork]

I'm very interested. As I under stand it the Lifan ork has an adjustable pick up to adjust timing but for it to fit a yx it needs 3mm shaved off but not too sure where

 

[rotn50]

Im pretty sure its only the adjustable lifan 150 ork that needs shaving, this link is the adjustable 150 ork, the one i can get you is the lifan 140 ork, there all different. Performance Racing Magneto Stator Rotor Kit Dirt Bike LF Lifan 140 150cc CDI | eBay The 150 as you will notice runs a different harness and cdi. Check this link again and this is the setup i can get you that runs a std kickstart harness and 5 pin cdi. MAGNETO STATOR ASSY KIT LIFAN 110 125 140cc, YX 140 150 160 cc PITBIKE | eBay They state they fit the lifan 140 but i have never seen a stock 140(with 150 adjustable stator) with this magneto from new.

 

[timeeh]

I brought one from Firepower Minis and Terry did the shaving from me b4 he sent it. Never looked back since, revs much smoother and no kickback at all when starting it (which in turn means no broken cases ) Came with new CDI and coil, piece of pis to install too

 

[DustyFork]

Thanks for the help guys. Found a Lifan ork for 100 bucks today ill get me mate to take the 3mm off too. Only thing is what Cdi do I run now. Don't mine spending a little. After looking at fire power minis there are a few on the market. Any ideas?

 

[rotn50]

you will require the same cdi as on this link and the harness that fits it.
Performance Racing Magneto Stator Rotor Kit Dirt Bike LF Lifan 140 150cc CDI | eBay

 

[rotn50]

160HO, GPX 125 Wiring Harness
NEW PitsterPRO 155z 160ho 160cc Engine CDI Unit

 

[rotn50]

160HO, GPX 125 Wiring Harness
NEW PitsterPRO 155z 160ho 160cc Engine CDI Unit