Search results

yeah ive spotted them but as my risers run the 4 long bolts that go right through the riser and into the clamp I will have to source some longer bolts. Im hoping that somebody has a 45mm adjustable triple clamp that way I could either buy fat bar clamps or buy the adaptors that you linked...

my triples are the none adjustable kind found stock on a lot of pitbikes and havnt found any 2 bolt risers that are for fat bars

WANTED: Triple Clamps - I would like to change from 7/8" bars to fat bars, so if anybody has a top triple clamp that has a fatbar clamp or even an adjustable 7/8" clamp I am interested! Will also look at complete triple clamp sets. Top should be 45mm and bottom should be 48mm. CONDITION...

The wrapping that I used was pretty cheap and off ebay so I doubt that it's waterproof so I sprayed the pipe with high temp paint before applying to give it a waterproof layer

another option could be to wrap the exhaust in high temp exhaust wrapping. I did it to mine and it works great and is super durable

fantastic, thanks for that guys. I'll start it up tonight or tomorrow and see how it all goes

nah I havnt tried to ride it or engage the gears while the bike is running just incase there is something more serious wrong with it, ill give it a go this week

G'day Guys, I have been slowly building up my bike and it is just about ready to ride. The only thing left to do is tune the clutch. I have been adjusting the length of the cable at the lever and at the point where it attaches to the engine but no matter how tight I make it, the clutch...

There is also 2 go kart tracks in Port Melbourne that might be interested. One is indoor on Salmon St and the other is outdoor near the Westgate Bridge

I have never ridden or seen one but some family friends of mine rave about them. They have sold their jap bikes in favor of them so they must be alright

JayRider, do you by any chance work for bp?

WANTED: - Aftermarket Coil like takegawa, CHP, show me what youve got! - Triple trees to suit fat bars on a PSTO (currently in the process of getting measurements) CONDITION: As good as possible! PREFERRED PRICE RANGE: $0-$60 but depends on what you have got LOCATION: Prahran...

Hey mate, I recommend buying most of your components second hand, there are some real gems that come up on ebay and gumtree that will really lower the cost. The first bike that i built was made using all brand new parts from DHZ and it ended up costing an absolute fortune. Do you have a...

By regulate I am referring to all of the rules regarding entry, working, camping etc. Will there be somebody who works there regularly or is it going off the honour system? Sent from my HTC_PN071 using Tapatalk 2

I'll take the billet 1/4 turn throttle. $25 posted to Melbourne? Also how much for the tyres? (if you would separate them from the rims) Sent from my HTC_PN071 using Tapatalk 2

Sounds great, but how will it all be regulated? Sent from my HTC_PN071 using Tapatalk 2

What a great idea! Any idea what membership will cost?

G'day guys, I am looking at upgrading the bars on my PSTO from 7/8" to 1 1/8". The current triple clamps that I am using are basic non-adjustable triples that can be found on most pit bikes (Link: http://img.auctiva.com/imgdata/4/7/8/9/5/1/webimg/639629241_o.jpg?nc=938) I dont want to...

Sounds perfect, could you email a few pictures to [email protected]

haha no worries mate, i had no idea that the z160ho had so many variations!