electrical

Hi Guys, Can any one help me with a wiring diagram for a 125 ststaor. I have re wired it every way I can think, but there is still no spark.

Hey guys, my sisters boyfriend has a 125 from cobb and co that thump 140 got for him before he passed away, there is no spark at all and all the wiring has been checked/replaced, so i ahve orderd a new stator and magneto etc. Iam trying to get the old Stator off but the two **** chine...

Hey, i bought a inner rotor off ebay for my xr50, but i think the magneto clearance is wrong on it cause when i go to take off it has a little delay. i have rebuilt the carby and drainned all the fuel incase there was water in it. I have looked everywhere to try find the clearance and couldnt...

hi all well, i was riding my pittie the other day after i put a new caliper on the rear. i forgot to tension the chain and i came of off while i was riding. it bunched up inbetween the font sprocket and magneto cover and smashed the magneto cover off. the little reveiver thing (not sure what...

This might sound crazy, but. My 110cc wont start, so ive taken out the spark plug and with it inserted into the lead and earthed up against the head it wont spark. However if i move it just slightly away from the head it does spark. I have tryed another plug and it does the same thing. Why wont...

Hi, Any you guys know on a coil wether the green or Black are postive. As I have a postie usually they only have one postive and the coil earths threw the frame. Also am putting an yx 140cc in my postie and just wondering wether you guys suggest putting in that lightened stator uit kit. It...

how do you tell if your stator is routed

Tools used: -Impact screwdriver, -14mm socket, -22mm open ended spanner with small extension bar, -rattle gun (air compressor), -Phillips head screwdriver and -Hammer 1)Take of the sprocket cover. 2)Take of the nut that’s holding the flywheel on (1 X 14mm nut). 3)Insert the larger bit...

i put a new stator on my 125 lifan. connected the wires exactly the same how i disconnected them black from bike into green from stator black/red from bike to red/black from stator blue/white to blue/white there is also a green with red wire. a white 1 and a yellow wire. these 3 dont...

Here is a photo i nicked from an old thread of 'NUMROE's' As you can see with the ORK style ignition and the pickup mounted directly to the mounting plate (not on an extension outward from the plate), and the tight fiting cover, I cannot fit a rotor/stator suitable to charging (well the...

All the stators on ebay say suits 125-140 lifan, there's none for YX140. It looks pretty much the same but I just wanna double check with you guys if it's compatible cheers

Can some one link me to a moto works 2008 lifan magneto. like ebay or something im just not sure which one it is. Also a magneto cover/front sprocket, side plate thingo. Thanks.

Hi Guys, a friend of mine just bought an Atomik Nitrous and wants to set it up for rec rego, however the nitrous only comes with a single coil magneto which does not have a voltage output to run a light setup. I'm hoping someone on here who has upgraded to a IRK ( which also only has a single...

I'm trying to diagnose why my bikes running like crap suddenly so I wanna swap out out the stator from my bro's 125, will this work or do they both use different kind of stators?? cheers :D

heys guys i have just bought a new stator plate or what ever they are called my old one snaped clean off i was just wondering does anyone know or have an idea of how to take off the bowl/magneto do i need a special tool or whats the go? thanks

Howdy, my chain came off and cracked the magneto cover which then pushed onto this little plastic thingy (see pic) and cracked it a little as well. From my understanding it looks like it should have a little steel thingy hanging out or some copper brushes or something so as the steel wheel...

I'm not sure if this is the correct forum, sorry if it isn't. Hey, Well my bike broke about 3 months ago now. I couldn't get any spark from it at all. I've spent the last 3 months trying to get it working myself. I've replaced the Spark plug, cdi, coil and checked all the electrics...

i am not getting a spark at the magneto,i am getting a spark at the spark plug .i installed a new magneto and still no spark any help[:confused:

i have a 4 stroke mini dirt bike the other day my son was riding it an the chain came off and broke the box off at the magneto so i order a new one and forgotwhat wire went with what wire any help would be nice

hay my bikes got a "magneto" problem, theirs no spark. ive tryed a new cdi and coil but still no spark. now the pikes making some strange CLICK CLICK CLICK sound from some gold thing that hads a rubber cover over it. this is the pic. http://img.photobucket.com/albums/v3...1/PHOT0014.jpg and this...