yx160

Hi guys at work today i had to pull this engine out that had a prob, the prob was not due to gearbox failure, more so it was maintenance that didnt happen basicly, this engine is a 160yx 4V and for a china 4valve apart from the rockers tapping loudly they go quite hard and sound great, the prob...

I recently bought the IRK kit off ebay that everyone has to try and freshin up my 70cc bike. I installed it on my chinese crf 70. The bike ran flawlessly before i put this kit on. I installed the components and ran it off my stock harness into my aftermarket rev box (didnt use the red one that...

hey guys, on my last three rides of been on i have had my chain come off go through the chain guard and into the stator snapping off the magnet first time we thought it was just because the chain was loose and came off, second time the chain tensioners where all buckled so the wheel just kept...

hi this is my first post here hope i'm in the right spot. I picked up a non running 88 ds80 for my daughter as she is out growing her 79 jr50. The previous owner said it lost spark one day and he had a friend look at it. he cut and spliced all the wires and it sat for 5 years. something seems...

Looking for your guys opinions and performance gain on and SSR 125SR i was reading thru >>>Performance upgrades guidelines: Stage I-III<<< and it says to switch CDI to a race one but which one ,any preferences on which is better then the other one and for the coils same thing , im trying to use...

Hi I have been searching the internet for what seems like forever trying to find settings for the 4v with a genuine Keihin pwk 28mm I have a jjg needle (which I was told is a 4stroke needle) and pilot jets 35 ,38 ,42 & 45 and main jets 95 ,100 , 105 it will idle with a lot of kicks with the...

Hey.. My engine is was making bit of a weird clunking noise, and felt it through the clutch lever a bit... so I took off the clutch cover to see if the nut was loose... It is really tight, and everything looks OK, but noticed the clutch basket and the big gear on the back seem to have alot of...

ITEM AND CONDITION: YX160 Kickstart, Suit 16mm Spine... Polished Stainless Steel PRICE, PAYMENT METHODS AND TERMS OF SALE: $35.00 + $6.00 postage to anywhere in Australia REASON FOR SELLING: Bought myself one, was a minimum order, so thought Id get more to sell on to other fellas as these...

Want to replace the kickstart on my YX160 motor.. Cant seem to find many that fit the 16mm spine... Lookin for one of those nice long forged numbers.. not a dodgy lookin chinese alloy thing.... Anyone got any ideas? Any yes, ive tried googling, but havent found much in aussie...

Hi, Ive come to the conclusion the gearing on my YX160 Mid Size is annoying me, so I want to know what some of you guys run with... I currently have a 16t Front and a 41t rear Im finding second is just too high, and 3rd gear is just too low for the tracks I am riding.. Cant decide if I...

Hey guys, My stator plate wires are different to my wires on my bike, (the colours) and i am kinda confused, can someone please tell me what goes to what? Much appreciated if you can! This is on the bike: This is my stator plate:

Hey everyone, I'm trying to get a stator/lighting coil for my 155z (should be the same as z160ho) to run a rev limiter. I have seen a few on ebay for around $30 (Brand Magneto Stator Coil 8POLES GY6 125 Moto Lighting | eBay), but I have no idea how to work out if they will fit or not? I know...

Hi all, I have a 160cc LE pit bite pro, I am upgrading the Magneto so I can run a front headlight, But am unsure what wires to connect where, it's different wiring then my friends 125cc pit bike, I'm unsure about the wires comming from the magneto, they are all joined into a big white...

Hey so I recently just bought a jap 90cc and when I was riding it a few days ago the stator nut that holds the magnet on the crankshaft fell off.. Well I didn't notice it fall off so I continued to ride.. When I was done I let my friend ride it aroun my block and the little like notch in the...

G'day Been trying to sell my bike locally for a few months with no luck has been advertised on egay with no interest either GPX Black Label forks 730mm, Adjustable Rebound and Compression, Spring Pre-load Elka rear shock Adjustable Rebound and Compression, Spring Pre-load, Remote Reservoir...

Nothing fancy... just some footage of me riding on the weekend hitting a little tabletop and double... I7_afSTrlTM Bike was running like a pig... got mud down the top of my OKO... :( so I was having trouble getting enough speed on the run up... Only footage of me Ive ever got, so...

Gday guys, Quick background on myself. I'm 19, about 65kgs, 5ft10 and used to ride all the time up until I sold my YZ85, YZ125 and ebay pitbike a couple years back. But my love for dirtbikes keeps calling, so considering I can't afford to buy the latest KTM 500EXC at the moment, I've decided...

I got a free 50cc Honda/clone dirtbike. I guess the rotor flew apart and killed the stator and.also the cover/chain gaurd. The bike came with a new stator but o need the rotor and cover. I need help on what rotor to order and from where. Thanks for any help.

I'll go first:) When you turn the manifold around on a KLX and chop the starter boss off, you need a shorter tensioner. I use the YX/Z ones. If you are SURE you are smarter than a spring-loaded plunger, and nearly as diligent, you can either buy a $100 "billet" adjustable one, or spend 5...

hey guys new to minriders, av just bought a secondhand quad with i think a lifan motor, it is a horizontal mount and iv had dramas with what i believe to be a timing positioning plate that is bolted to the cdi housing that goes on the outside of the magneto flywheel. it is gold in colour and...