zongshen

Hey, i bought a inner rotor off ebay for my xr50, but i think the magneto clearance is wrong on it cause when i go to take off it has a little delay. i have rebuilt the carby and drainned all the fuel incase there was water in it. I have looked everywhere to try find the clearance and couldnt...

hi all well, i was riding my pittie the other day after i put a new caliper on the rear. i forgot to tension the chain and i came of off while i was riding. it bunched up inbetween the font sprocket and magneto cover and smashed the magneto cover off. the little reveiver thing (not sure what...

Good evening everyone. Im just doing a bit of dreaming at the moment. I got my v2 getting some work done to it at the moment and was looking for a few more goodies. Whats everyones thoughts and experiences with the Racing Outer Rotor kit and the TB 184cc bigbore kit for my 160?? Is the...

Hi, Any you guys know on a coil wether the green or Black are postive. As I have a postie usually they only have one postive and the coil earths threw the frame. Also am putting an yx 140cc in my postie and just wondering wether you guys suggest putting in that lightened stator uit kit. It...

Hi Guys, I was browsing Pickles auctions today and came across this... I was wondering if anyone could pinpoint the model and whether the plate I can see on the side of the frame in the pics is a compliance plate or not. If I can register this thing I'll probably go buy it for the GF to...

how do you tell if your stator is routed

Tools used: -Impact screwdriver, -14mm socket, -22mm open ended spanner with small extension bar, -rattle gun (air compressor), -Phillips head screwdriver and -Hammer 1)Take of the sprocket cover. 2)Take of the nut that’s holding the flywheel on (1 X 14mm nut). 3)Insert the larger bit...

i put a new stator on my 125 lifan. connected the wires exactly the same how i disconnected them black from bike into green from stator black/red from bike to red/black from stator blue/white to blue/white there is also a green with red wire. a white 1 and a yellow wire. these 3 dont...

Here is a photo i nicked from an old thread of 'NUMROE's' As you can see with the ORK style ignition and the pickup mounted directly to the mounting plate (not on an extension outward from the plate), and the tight fiting cover, I cannot fit a rotor/stator suitable to charging (well the...

All the stators on ebay say suits 125-140 lifan, there's none for YX140. It looks pretty much the same but I just wanna double check with you guys if it's compatible cheers

Can some one link me to a moto works 2008 lifan magneto. like ebay or something im just not sure which one it is. Also a magneto cover/front sprocket, side plate thingo. Thanks.

Hi Guys, a friend of mine just bought an Atomik Nitrous and wants to set it up for rec rego, however the nitrous only comes with a single coil magneto which does not have a voltage output to run a light setup. I'm hoping someone on here who has upgraded to a IRK ( which also only has a single...

I'm trying to diagnose why my bikes running like crap suddenly so I wanna swap out out the stator from my bro's 125, will this work or do they both use different kind of stators?? cheers :D

Ok theres a thread and its called ( THE I JUST DID ) so i decided to make a thread called (THE IM GOING TO) soo we can all chat about what where going to do with our bikes, or whatever. ENJOY

heys guys i have just bought a new stator plate or what ever they are called my old one snaped clean off i was just wondering does anyone know or have an idea of how to take off the bowl/magneto do i need a special tool or whats the go? thanks

Howdy, my chain came off and cracked the magneto cover which then pushed onto this little plastic thingy (see pic) and cracked it a little as well. From my understanding it looks like it should have a little steel thingy hanging out or some copper brushes or something so as the steel wheel...

Seeking some Atomik Link 250 riders to ride with in melb west Subs,,,,,, Anyone Out there?????

I'm not sure if this is the correct forum, sorry if it isn't. Hey, Well my bike broke about 3 months ago now. I couldn't get any spark from it at all. I've spent the last 3 months trying to get it working myself. I've replaced the Spark plug, cdi, coil and checked all the electrics...

i am not getting a spark at the magneto,i am getting a spark at the spark plug .i installed a new magneto and still no spark any help[:confused:

i have a 4 stroke mini dirt bike the other day my son was riding it an the chain came off and broke the box off at the magneto so i order a new one and forgotwhat wire went with what wire any help would be nice