250cc atomik hummer .Also rec rego question.

[sniper]

I got a 250cc atomik hummer last week and has fine apart from when i turn the throttle quickly it splutters and nearly totaly cuts out(i had a atomik 125 motox and the same thing happend).What can i do to fix this?

Also it sounds real rattely on the back wheel when riding,the noise is coming from the rear sprocket as the chain is going around.My chain isnt to tight and i have no loose spokes so could it be my bearings?

I would like to get this wreck registered for riding on fire trails in the bush,does anyone know where i can get a wreck rego kit from?And do i need a motorcycle front light or can i just use a good bike light?

Also anyone else got a hummer with problems?I cant find any other web site that discusses these bikes apart from here.Is there another site that i can look at about these bikes?

 

[daniel40]

adjust the needle on the carby that should stop it from cutting out

 

[foolsp33d]

not alot of hummer specific sites around if any at all unfortunatly..

you will need a decent light for the front, as its not about pedestrians more about logs and wombats.. about $100 gets u a sweet twin halogen one from most bike shops.

the rattle is probably from all the china bolts falling out(did you loctite them all???-DO THIS) then replace your chain with something of some quality, possibly the rear sproket if tis to far gone.. if you search for hummer on the site you will find a fair few threads with some helpful info..
Where are you based? there maybe someone local to ride with or give you a heads up to the situation...

 

[sniper]

None of the bolts are loose,but now i think the noise is comming from the rear brake as it wobbles side to side a little bit when i move it with my hand.But i cant tighten up the nut anymore than it already is.

Also,when i lift the bike up so the rear wheel is off the ground it seems like the swing arm might be loose but im not sure if it is suppose to be like this.On both sides of the swing arm where it connects there are washers inbetween that move freely and not sure if i should tighten it.

 

[benox]

My mates dad had a 150cc Hummer, he sold it.

 

[anton78]

Hello new to this site just got a hummer 250 and have not been able to start it does anyone know what the battery model no for these bikes are .

 

[----M@TT----]

have a look on the ebay atomik site.