Another project, pitpro 155 se

[zwebx]

dec heights nice and high

 

[Phil67]

Is that rocker cactus?

 

[zwebx]

Is that rocker cactus?

its still smooth in action (maybe a little movement in the roller) i did the valve stem seals, still smokey as all hell so i wont be able to make it sunday and i will have to get some rings sent to my from dhz or somthing

 

[rotn50]

How long have you run it for zac? Maybe the muffler packaging and the inside the pipe are really oily and needs burning off mate?

 

[zwebx]

How long have you run it for zac? Maybe the muffler packaging and the inside the pipe are really oily and needs burning off mate?

i ran it without the pipe on for that reason (i ran it for 1 minute or so) i could run it for longer and see what happens

i suspect my rings are ****ed as because at vcm and frankston the air filter had a little tear in it (i did not notice till i got home from frankston)

 

[zwebx]

but still i get hard to kick over compression out of it? and the oil rings look similar to when they were new the 1st compression ring felt a bit blunt but the second was still sharp

 

[Phil67]

rings in the right way? Not upside down I mean. Mine had that with the TB piston too, it is now an ashtray

 

[zwebx]

rings in the right way? Not upside down I mean. Mine had that with the TB piston too, it is now an ashtray

i put the shiney one on the top notch or could have i put that upside down

 

[Phil67]

there is a stamp on the rings, that should face up.

 

[zwebx]

Anyway got new rings in her and there is much less/ no smoke now i did not hone the bore or anything so thats why the old rings lost a bit of tension from getting so hot that one time..

anyway on to a new problem.. forks are screwed so atm im going to borrow my mates and im about to pick up a gpx rear shock for my bike because the old one wentbad as everyone at frankston saw lol it was actually a little fun trying to hold onto it