Bleeder screw on the lxr

[Judge]

I need some help with the fork bleeder screw on a nitro circus lxr my son has lost them does anyone know the size of them an the tread type I spoke to dhz they said they don't sell them so I'm going to have to buy a set of fork bleeders to replace them

 

[my67xr]

KTM use M4 x .7mm pitch on a lot of their bikes.
Motocross MX Fork Bleeder KTM | eBay

Most bike shop's have after market bleeders screw kit's on the shelf too
Mini Fork Bleeder Valves Japanese M5X0 8mm | eBay
Motion PRO Fork Micro Bleeder M5X0 8 Silver Kayaba KYB Inverted Forks Bleeders | eBay

Ballard's sell them too r/h side bottom of the page - ISSUU - Ballards Offroad Catalogue 32 by BALLARDS OFFROAD

 

[Judge]

Thanks buddy is that the size of the screw on the lxr m4 .7mm pitch

 

[my67xr]

I don't know sorry, they were just examples.
I'm sure someone here has replaced their's for the push type bleeder's though.


The second link's above have the bleeder's in M5 x .8mm pitch
If you went to Master's Hardware etc and buy a bolt, M5 x .8mm pitch, take it home and try the thread in the fork's
If it fit's then that's the thread/pitch you need
https://www.masters.com.au/product/900043338/champion-m5-x-25-button-head-cap-screws
https://www.masters.com.au/product/900043338/champion-m5-x-25-button-head-cap-screws