Bulldogs93s' 1982 Z50R

[The_GDFP]

The kit comes with the tapered roller bearings. You left your ball races in? Maybe message me with a pic, or put in the thread. I'll Express any bits, if not lining up.

Looks great, though. I should have slipped that XR75 arm in the package, eh? lol

 

[eichkay]

I'm not to sure about the 10" rims they look nice but look a bit modern and out ofnplace on the bike IMO. I'd also rather 8" over the 10" rims personally. Neat bike tho should be a head turned once done. have you done a good shake down ride or just started modding straight up ?

 

[eichkay]

Are they klx110 forks ? they look a tad short compared to pictures of this setup ive seen elsewhere, but it might be the 10" wheels making it look weird..

I picked up my forks from Hillz yesterday arvo and they look the same length as the ones in the attached pic with the tops rising out due to the extra length..

 

[Hillz]

they do look tiny those forks bully no clearance at all

 

[The_GDFP]

They have NSR50 upper legs, a little shorter than stock. They do look low, compared to on my bike. I had fat 10's for mockup.

 

[bulldog93]

I'm getting rid of the 10sand putting the 8s back on. One day any ways. When i pulled the old forks off it had tappers.

I havn't done anything wrong so I think.There wass play from the bearing and stem befor I assembled it. That's why I left old in? I'll get it sorted out though.

I still want the TB swinga fpm Just have stuff to do to the YZ first.

PS havn't rdden it due to carbie being too big. Just need throttl cable. That'll come in bar kit though

 

[bulldog93]

Reckon this would work for bars?

Pit Bike Pit Stop :: MiniBikes :: MiniFun :: Red Baron Aluminum Mini MX Bar with Bar Pad Red Baron Honda Kawasaki Suzuki Yamaha CRF50/XR50 KLX 110 DRZ 110 TTR 50

 

[eichkay]

Reckon this would work for bars?

Pit Bike Pit Stop :: MiniBikes :: MiniFun :: Red Baron Aluminum Mini MX Bar with Bar Pad Red Baron Honda Kawasaki Suzuki Yamaha CRF50/XR50 KLX 110 DRZ 110 TTR 50

I think the red bars would be wicked... I'll most likely get red or silver for my z50r setup these bars are what i was planning on using but just brought some protaper locally for now to hold me over..

 

[bulldog93]

I'm going black for now.

I was going to get the billet bar kit and ask him to take out the clamp.

Just unsure if the lenght at the bottom bend would be long enough.

 

[bulldog93]

Just ordered:
Red baron MX bars
Red baron billet throttle tube
Cables,
Metal Mulisha grips and,
ASV serise 3 lever and pearch.

Will be 10 days befor they get thelever iin though .

 

[eichkay]

Check this thread for shock length we were talking about the other day.. one guys has 280 and 330mm shocks on a TB +3 swinger

Tbparts Swing-Arms - Planetminis

 

[bulldog93]

Measured mine.. on the stock swingarm.. They are 330. So the 330's should go nice with the +3..

 

[bulldog93]

Well. I tried to sell it but nobody wanted it so I just paid for my TB +3 swing arm and 330mm Gazi shocks as pictured below

Thanks to Terry as always!

 

[TomaszBurcon]

shocks look sweeet!

 

[bulldog93]

Just have some problems with the shock eyelets being too big. Some bushes will fix that and exhaust touching the right side rear shock.

 

[TomaszBurcon]

looking good man! you doing anything with all of that black on the motor?

 

[bulldog93]

I brought a Redbaron MX bar kit to day and fitted it. Few little problems. The bars are NOT long enough so I will. be drilling and sloting holes so I can adjust the clamp distance.

I also need a spacer made for the front axel.

Other then that it's coming along nicly. Just have to adjust brakes and chain. Also have to find a shorter throttle cable as the one in the bar kit is too long.

 

[TomaszBurcon]

Going to paint strip your engine man?

 

[bulldog93]

Was going to leave as is untill after shearers then put an 88 with head on it.

 

[bulldog93]