Alexdbishopp
New Member
- Joined
- Nov 8, 2016
- Messages
- 1
- Reaction score
- 0
Hi all , bought a bike at the weekend ! 125 pit bike . All starts up and runs smooth . Kick first time etc etc.
First problem - When I bought it I was aware that if put in first gear when stood still it stalls ,you have to roll it forward and go into first moving so it doesn't stall! Also when the clutch is engaged the bike doesn't roll any ideas ?
Second problem - checked the oil after a few runs and notices there was little oil in . Bought some 10w40 semi synthetic today and filled it up ! Started it up and run it for a bit then noticed oil was leaking from undearneth And you could hear it squelching , some time the bike would die after. Any ideas ?
First problem - When I bought it I was aware that if put in first gear when stood still it stalls ,you have to roll it forward and go into first moving so it doesn't stall! Also when the clutch is engaged the bike doesn't roll any ideas ?
Second problem - checked the oil after a few runs and notices there was little oil in . Bought some 10w40 semi synthetic today and filled it up ! Started it up and run it for a bit then noticed oil was leaking from undearneth And you could hear it squelching , some time the bike would die after. Any ideas ?