DECEMBER FOTM. . . . . Vote Now

Mini Dirt Bikes & Pit Bikes Forum

Help Support Mini Dirt Bikes & Pit Bikes Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

Who should be our December 08 FOTM?


  • Total voters
    79

I_THUMP

Well-Known Member
Joined
Jul 22, 2007
Messages
3,227
Reaction score
27
Location
location, location
Heres this months line up and voting will close about the 20th of this month so we can run a fifty of the year comp.

Wogtaz ryder

100_0009.jpg

  • klx110
  • 134cc
  • FMF exhaust
  • Full manual hydraulic clutch
  • Fastway pegs TBR pegmount

Sagaone

IMGP0230.jpg

  • YX 150 with ported head and IRK
  • 28mm MOLKT carb
  • 32mm h-bomb replica exhaust
  • cut and polished ingnition cover
  • fastace as-02 forks
  • dnm-hrc rear shock 1000lbs spring
  • universal deuce mini bars
  • asv rep levers
  • moto death grips
  • sano graffiti graphics
  • joker style 1/4 turn throttle
  • billet hubs
  • nsk bearings
  • dhz swingarm
  • EVERY bolt/nut/bearing changed and loctited
  • h/d pegmount
  • kenda millville tyres

No crf50 here

minitart.jpg

  • 148cc YXMotor
  • IRK & Sling
  • Midrange cam & springs (Akunar)
  • HD clutch springs (Akunar)
  • 24mm Mikuni Carbie
  • 14t front 37t rear
  • China chain & Skateboard wheel chain guide
  • TT92 front tyre
  • MICHELIN Pilot Sport rear tyre
  • 2.15" rims
  • Fast Ace AS02's & Fast Ace BS58AR rear
  • 1/8 turn throtle
  • HONDA format performance oil cooler kit (Akunar)
  • mix 'n' match front brake setup that works like no other
  • no rear brake, no disk, no mounts nothing
  • Alloy Frame
  • Pro Taper SE hangers & Grips
  • Fold back flippy brake leaver thingos
  • Dyno Tuned & then retuned
  • Bike built on a kitchen scale to be as light as possilbe
  • Head's complete but not fitted, bigger valves - 3 angle valve seats, reshaped ports blah blah
  • 11.3 HP In thrid gear 63km/h

RB-125

S5000032.jpg

  • Pitster pro X4 160cc
 
Themountain

0112081334gh2.jpg

my EBAY special!!!
Put all the parts I had in the garage together and...voilá.....a winner

Jasonbutey

P271108_1639.jpg

  • xr50 03
  • jono porto replica
  • i have front sano disk brakes
  • tk exhaust
  • pro taper bars with pro taper grips
  • black sprayed frame
  • heavy duty front springs and rear shock
  • 88cc takagawa bore kit
  • kenda millville tyres

Woods11

Picture006.jpg

  • 08' Pitster X4R
  • TB 177cc, Ported V2 head
  • Takegawa s25 cam
  • HD Clutch plates and springs
  • Marzocchi Shivers
  • Bridgestone M404 tyres

Motovert Pro

bike20004.jpg

  • 06 Motovert Pro
  • Lifan 150cc
  • VM26 Mikuni Carb
  • 32mm Mandrel Bend Exhaust
  • Carbon Fibre Ignition Cover
  • Marzocchi Forks
  • DNM 1200lbs Shock
  • Pro Taper Bars
  • Cateye Computer
  • Braided Lines
 
Steve101

2035d1228261605-december-fotm-entries-crf50-stuff-001-medium-small-.jpg

  • 09 crf50
  • sano bar kit with billet throttle
  • five-0 hd footpegs
  • tall seat
  • cut down ignition cover
  • fox float shock
  • red billet gas cap
  • uni filter
  • fast50s extended folding shift lever
 
Last edited:
haha whats with china bikes beatin real hondas?
 
good month!! it was a hard 1 between Sagaone n wagtazza but i went with Wagtazzas klx110 cause that thing is sweet as!!!
it was a tie for 3rd place with woods11 n steve101!!
 
thanks thump i've been run off my feet

good month

No worries mate I just did it over lunch lol

wtf happened to my ENTRIE!!!!!

Sorry realmenride50s but there was a total of 12 entries and the limit was 10 so I thought it was fair to remove all 3 people that have been in the comp over the past few months to give others a chance. No offence intended.
 
Wogtaz for me very nice bike
I have a few bits and pieces on the way for my bike hopefully it will be ready for jan FOTM
 
Last edited:
Close call

Great bikes all round but SAGAONE for me, Bring on FOTY.
 
Sagaone gets my vote because I luv the look of those alloy frames and swingers. He has built a very nice looking bike around that frame and im sure it would ride as good as it looks.
 
u have to have heaps of billet and a cool sticker kit
 
Back
Top