Electrical Issues.. Please Help

[outtacontrol11]

Hey i've been trying to wire up a bike with little results.
I have followed the wiring diagram i found on here and the only way the bike would get spark is if the earth cable was 2-3mm off the frame and then it would spark as well as a spark jumps between the wire and the frame.

I have not used the yellow and white wires coming out the engine as i thought they would be for a charging curcuit? and to the right of the wires running from the pick up there is like a little plug with 3-4 wires running from it, i assumed it was for nuetral light? Any help on this would be appreciated

 

[MiniFighter]

Hey mate....What bike/engine?

 

[dadof2]

http://www.miniriders.com.au/motor-...park-c-d-i-factory-o-r-k-without-battery.html

if no spark when you earth that wire to the frame that would probably be the kill switch wire

 

[outtacontrol11]

hey mate never thought i may be using the kill switch wire, the bike is a pw80 frame with a 110 cc engine, the engine is a 3 valve.