Electrical question

[cruisingram]

I am putting a Lifan in an SDG frame. Everything is bolted in- now to wire it! I have NO electrical schematics for either of these two motors-frame- well, the Lifan motor came with some stuff in Chinese I can make heads nor tails over-

but here is the connection to the motor side of the old SDG motor-

This the the frame side of the SDG electrical pig tail going to the motor-

And this is what the new Lifan motor has connected to it:

Okay- how do I wire this thing?

 

[sean01]

pretty simple...

im guessing you dont have a battery or anything!!

engine side you need blue/white, black/red and green
cut and join them to the same coloured wires in the harness.. the left over wires can be tapped up individually..

if you run a battery then connect both the yellow and white to the same in your harness..

 

[cruisingram]

No battery, no lights. So I use five of the loose wires, meaning a blue whire, a white wire, a green wire and a black wire- or are you saying from the piece with the connectors, with the striped wire- blue/white?

Sorry, just trying to be sure!

 

[timeeh]

this might help last post has pics of completed setup.

http://www.miniriders.com/ask-tech-masters/33526-electrics-2.html

 

[sean01]

no, re-read my post..

iv outlined 3 wires. 2 of which are stripped..

 

[cruisingram]

Thanks- appreciate it- sorry for being confused- easy to misunderstand on teh internets

 

[sean01]

too easy, let us know if you have any more troubles