Fastace As02 or As03 Forks?

[Mack]

Was that the monstermoto site guide? Those settings are for a very firm ride.

 

[NinetySix]

yeah that guide...

was just worried i missed something

 

[Mack]

How much oil came out of them, did you happen to measure?

 

[NinetySix]

nah, only did the one leg too... ill have a look at the other, just wasnt sure if i drained it right... took the fork cap off, the rod thats inside the damping rod and poured + pumped the rod till no more oil came out, left it upside down for a while to drain... then poured oil back down the little hole at the top of the rod, pumped it a bit to get the oil working thru but it was over flowing by like 120ml (the leg with the red knob)

 

[Mack]

Are you talking about AS-02 Fastace forks?

 

[NinetySix]

yes

10 characters

 

[fiddy_110]

as02 left blue can adjustable，03 right red cant adjustable it‘s fake

 

[tubes380]

thats because the as-03 are the cheaper fork and many people believe that since they have a higher number that they automatically become superior

 

[MILLPIT]

Anybody fitted fastace forks to pitpro 125rr? Did you have to modify or make new mounting bracket for the front brake caliper?

 

[Mack]

I have been PM'ed by a few people, that have tried putting oil in through the fork caps and down the adjuster tube on Fastace AS-02 forks. This is not how you go into these forks! I think there is a guide somewhere showing going in through the top of Staggs forks, but these are different design forks! It would maybe be possible for someone who really knows what they are doing, to do it. But you would have to be able to set your air piston height accurately from the bottom of the fork and purge all air from the oil cartridge.

 

[tubes380]

so howd you do it then mack you should write up a how to and then everybody will know for certain.