general thumpstar mods (anything goes)

[dime_megga]

Hi guys, just wanted to start a new thread on easy & cheap ways to mod a thumpstar, wehtr it bee electical mods, to proformance mods, flaming exausts, and other tips and what not please post here if u have any tricks or anything like that.

 

[XxFMXxX]

I don't think this is going to catch on.

 

[twisties]

why dont you look at the tutorials section? theres already hundreds of pages of good info

 

[bulldog93]

http://www.miniriders.com.au/tech-talk/12274-tricks-trade.html

http://www.miniriders.com.au/tech-talk/10036-getting-bikes-setup-right-mods-tips.html

 

[headsmess]

im told small stuffed toys from maccas are th G O

 

[dime_megga]

sorry guys ...


im new here. haha

 

[SnItChY]

sorry guys ...


im new here. haha

Thats ok ,Welcome to miniriders ,you will find anythink and every think for you bike here

best of luck and enjoy the show

 

[XxFMXxX]

Thats ok ,Welcome to miniriders ,you will find anythink and every think for you bike here

best of luck and enjoy the show

You said it!

 

[mattbombers]

well as posted in the "tricks of the trade" thread, geting i die grinder onto the weld inside ya exhaust lets the fumes flow through easy, its good free mod to do.

 

[dime_megga]

well as posted in the "tricks of the trade" thread, geting i die grinder onto the weld inside ya exhaust lets the fumes flow through easy, its good free mod to do.

thanks for the tip mate

I now have a new question, does anybody have any suggestions about what i should do with my exaust now, about 4 days ago my muffler blew off half of the mount for the muffler is snapped, and most of the hols that are left on it are stripped, i have put bigger bolts with massive washers,
but

an hours ride+ a hot exaust + a bump

= a loud noise and weelspin (muffler keeps falling off) and ideas, as i dont have easy accses to a welder.

-Corey

 

[bulldog93]

get the local bike shop to do it(they did it with mine) or get a new exhuast you could also tap it out then get new bolts??

 

[dime_megga]

get the local bike shop to do it(they did it with mine) or get a new exhuast you could also tap it out then get new bolts??

hmm, will try and tap her in now, see what happens, thanks mate