Help oil seal replacement, clutch cover removal

[NOC]

Recently my parnter's Son brought a pit bike, so i'm currently trying to help him out... its a 4 stroke 125cc, and looks fairly similar to other pit bikes.



After noticing there was oil leaking from the small round plastic cover, we removed it and there was quite abit in there and further examination the hose from the engine was blocked.. assuming that its just the oil seal in the cover which we need replacing.. I've got a couple of questions before I change it over..



To replace the seal I assume I have to remove the Clutch casing cover after I remove the 8 bolts? In the picture above the nut at A do I undo that before removing the Clutch casing cover?

Any help would be greatly appriecated.... I usually work on my sportsbikes, but never a pitbike before.

Cheers Matt

 

[bulldog93]

You can remove nut A after dismantling it I belive..

 

[sean01]

remove the screw under nut A and the whole linkage will come out... you should be able to just push the seal back in if it isnt damaged..

 

[NOC]

Thanks for that... I'll have a crack at it this week.. let ya know how I go..