Hey guys I just brought my little nephew a Crf50 but after I brought it I found out it has had a Motovert 133cc engine fitted
Now I tried to start it today and it won't start so I am asking for some help from the techs or pro's as I have tried a few things and it won't start
I pulled the carby off of it and cleaned it all.
Pulled the 38 jet out and cleaned, the 72 jet out and cleaned, the float and needle and cleaned
All holes in the carby cleaned.
Put it back together and tried to start nothing.
I wound the screw in on side of the carby all the way in home then out 2 1/2 turns and still won't start.
Now If I spray some "start ya bastard" it will start and rev up for 1 second then stop but will not run or start by it self.
I pulled the fuel filter off as it was on the wrong way around and tried that and nothing.
I undone the screw at the bottom of the bowl and fuel dribbled out so it must be getting fuel???
It must be getting spark I would think as it will run with start ya bastard but not with out.
Can anyone give me some tips on settings to try please?????
Now I tried to start it today and it won't start so I am asking for some help from the techs or pro's as I have tried a few things and it won't start
I pulled the carby off of it and cleaned it all.
Pulled the 38 jet out and cleaned, the 72 jet out and cleaned, the float and needle and cleaned
All holes in the carby cleaned.
Put it back together and tried to start nothing.
I wound the screw in on side of the carby all the way in home then out 2 1/2 turns and still won't start.
Now If I spray some "start ya bastard" it will start and rev up for 1 second then stop but will not run or start by it self.
I pulled the fuel filter off as it was on the wrong way around and tried that and nothing.
I undone the screw at the bottom of the bowl and fuel dribbled out so it must be getting fuel???
It must be getting spark I would think as it will run with start ya bastard but not with out.
Can anyone give me some tips on settings to try please?????