irk wiring help please!!!!!

Mini Dirt Bikes & Pit Bikes Forum

Help Support Mini Dirt Bikes & Pit Bikes Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

Divy

Well-Known Member
Joined
Oct 12, 2006
Messages
1,206
Reaction score
0
ok guys well my flywheel is off an my irk should be here soon but i have some questions i dont know **** about wiring so any help would be good here are some pics
i want to know the part with the red circle in pic1 does that get replaced by the other on in the red circle?
in pic1 blue circle does that get connected to anything? i dont know what it is
and which wires get connected to what???
help please im confused:confused:
13b.jpg

cdib.jpg
 
your lucky to have one the *** ON EBAY LOST my email and re sold the IRK!!!!!
So i have no IRK :( :( :mad: :mad:
 
GRRR the circles i drew on the pics didnt show so ill explain what i circled
when i mean the part with red circle i mean that black box(cdi) does the old one near my blue fuel filter in pic1 get replaced with the one in pic2
blue circle i mean the black thing with the green wire above the sprocket
 
yeah i got mine from dhz he sent me a bore an piston instead of the irk i told him an he said he will post the irk today (fingers crossed)
 
lmao yeah bad i brought a pair of shift boots on ebay but the guy didnt post anything to anyone an he got kicked off but now im out 280bucks
 
dhz does sell heaps of stuff and i think hes running the place by himself so he falls behind, bit dodgy in my opinion,

with the install divy, just follow my instructs by the way theres no red circles on your pics. but everything gets replaced by the new kit, even most of the loom and cdi
maybe if you post up some pics with the red circles i can be more specific
 
shouldnt why dont you just try and if anything goes wrong just replace the whole engine for 300 bucks cant be easier than that can it?
 
enough talk about sik-pj more talk about wiring please:)
 
here is the pic with circles lol can some one please help?? same questions
blue circle what is it does it connect to new wiring ??
red circle does it get replaced with the new one that comes with the kit??
yellow what wires connect to what???
mmm.jpg
 
blue circle- oil sensor not used just chop the wire
red- circle- replace with cdi that comes with kit
yellow circle- connect to new cdi and coil ( you can get rid of all the annoying wires that do nothing)
 
hey tubes are you the same tubes380 seller on ebay??? was looing for stuff tonight and seen your name and thought i would ask
 
ok well irk is her *divy throws his hands in air YEY* LOL
new cdi has 5wires you can see on the first page pic
the red wire is connected to the black on irk white wire on cdi connected to white wire on irk, green with round connection on cdi earthed to frame
now there is one green wire an one yellow left on cdi were do they get connected to??? i have two wires green an yellow for killswitch an two wires for the coil yellow black stripe an green??
what do i do???
please help
 
mate you really need to read my instructs did you get them?
alright the green and yellow wires coming out of the cdi go to the coil
problem is though if you connect them directly you wont have a kill switch
so what i did was connect the green wire directly to coil green wire
the yellow wire connect to one of the kill switch wires and the other kill switch wire connect the the black/yellow wire on the coil that way you have a the switch in the circuit.
another thing whe you go to start her up try on both of the kill switch settings as for some reason mine had to be on the "off" position for it to actually work i think i might have reversed it somehow but it doesnt matter as it still works.
hope this helps ya out mate make sure you insulate all the wires so nothing shorts out aswell
 
farrk i feel like a dumb khunt i was trying so hard to find out how to wire it i forgot all about your email you sent me tubes

so mines all wired up now i havnt started it as i have to get oil tomorrow

but i didnt connect the kill switch cause im still not 100% how to do it i read how you did it tubes but im a dumb khunt when it comes to wiring
would you be able to post a pic of how you did your kill switch??
thanks again tubes:):)
 
Back
Top