is this a Pitsterpro LXR or a X4R ???

Mini Dirt Bikes & Pit Bikes Forum

Help Support Mini Dirt Bikes & Pit Bikes Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

djeuro1981

Well-Known Member
Joined
Jul 16, 2014
Messages
58
Reaction score
0
i just bought this and i am now confused as there is no markings or stickers to state model,si have taken photo's and hopefully someone can identify this for me1655650_10154342259470125_3290570977615753758_o.jpg

10293679_10154342259330125_4920947936331040483_o.jpg

10497386_10154342259715125_7622910341106302736_o.jpg
 
it's an X4R going by the plastics, same as this one

img0871ro.jpg
 
last thing does anyone know where i can get some good sticker sets and plastics for this bike
 

Miniriders.
Sinister50's.
Hole Shot Hero.



Sin and holeshot are both Highly reputable sign writers and top blokes! ;)
 
Last edited:
do you have pics on the l/h side of the engine ?
i reckon it might have a GPX150
 
yeah the bolt pattern on the rocker covers is side to side, a Z160Ho is top and bottom
 
Mate pull the exhaust tip off and remove the little cone shaped restrictor. Not only will it derestrict the exhaust it will sound better. I had the same muffler and when I installed it there was a noticable power loss, being disappointed I pulled it off whilst in the bush and once I did it was amazing.
 
I know of the bike craig put up and it was a 2011 and the x4r was running a 160 ho motor.
 
I know of the bike craig put up and it was a 2011 and the x4r was running a 160 ho motor.
good spotting there mick,
it's definately worth taking that silencer cap out of the back of the muffler.
 
Back
Top