Lifan 150 into a CT110 Postie, wiring help needed

[PIG_150POST]

Hi guy's i have just put a lifan 150 into a post, it previously had a 140 in it with after market CDI, i put wire to wire thinking they were the same and no go, i was just wondering if i have to run the CDI that came with the 150, any info on this will be greatly appreciated, just to get back on the road to do some.........

 

[themountain]

you have to run it with the cdi it came with and its better to get the wireloom too

 

[sean01]

yep the lifan 150 runs a digital cdi unit, early engines runs no digital.

you need the loom and the large black cdi..
where did you purchase your engine from?

 

[PIG_150POST]

Hey thanks for the reply's guy's, yeh after dicking around i found out i had to use the 150 cdi, got it going it's F$#King unreal, i got the motor down at Yamoto, Moto revo, moss st slacks creek, cool bunch of guys, i will post some picks up soon, thanks again.

 

[redracer]

Just out of curiosity, did you just install the CDI or run a whole new loom? (Any plug adaptions)?

 

[PIG_150POST]

You have to use the CDI supplied and get a loom its easier, like the guy's said in this thread, there is also a wiring dwg as well, the charge system will run the light but the batery will die at about 2 weeks of riding all the time (due to brake light and nutral and horn running off batt and not outer rotor) i have a switch that turns the light off during the day to direct current to top the batt up works well, there is a fix to run the wasted earth to batt as well, i had a 140 in the post it was good but kept breaking kick start gears, and then finaly gave a good boot and cracked the case, the 150 fiddy is the go, stronger box and heaps more torque.

 

[redracer]

If i was purchasing just a 155Z and running the cdi and loom like yourself, How much of the loom do I need? (Also how big is it?)

Anybody, know the cost of a 155z Loom

(Sorry for sidetracking your posts)

 

[sean01]

the 155z loom should be no different to a normal china engine loom.
but you would need all the loom

loom is supplied with the engine
DHZ Mini Moto