Loncin 125CC wiring?

[vroooOOOm]

I've fitted a Locin 125 engine and it runs OK but I think I've got something wrong with the wiring as I have no lights , does anyone know what wires are for what? any help would be appreciated.

 

[johnnie5]

where do those wires go ? the rest of the pic is missing

Yellow is most commonly used for the stator(alternator)

 

[ryan12590]

you need to hook the red blue and green up to the corresponding wires on the cdi and the other two you do not need they are for lights and ****

 

[eichkay]

Yellow is lights, white is neutral indicator. But in your case one of the yellows will be "N" and the other will be lights

 

[eichkay]

you need to hook the red blue and green up to the corresponding wires on the cdi and the other two you do not need they are for lights and ****

He wants his lights to work...

 

[ryan12590]

oh i see sorry i thought you just didnt know what they were

 

[R_dub]

so does that mean i can't add any lights since I have no yellow wires? I only have the green, black/red, and the blue. Is there some way to tap into the coil to add lights?

 

[ryan12590]

you can check your stator to see if there is two electrodes behind the flywheel (two big magnets with copper wire wrapped around it)if there is only one you can get a new stator and it should come with 2 more wires (the yellow and yellow/white) i dont know how much stators are my mechanic sold me one for $15 when i broke my outer magnet bracket from chain but i think i got it for cheap..